christopherbailey
New Member
I have most of what I need to brew my first ever batch, but I have a wee problem: when the landlord installed the stove, it was done below the level of the counter. (see photo 2)
I have tried to pull the (gas) stove away from the wall to raise all four feet under the stove but I fear the pipes are too tight.
I would prefer to avoid involving the landlord.
I would also prefer not to get a propane burner so if I want to do this on my stove, can I getaway with a ring to raise it? (see photo 3)
I bought the boil kettle thinking I might do all grain down the road so it's large in width (14.5") and volume (42qt) but not a super tall pot.
I've been in one house fire, I don't want to be in another so ... thoughts?
TIA,1
Christopher
EDITED TO ADD: Can't use left burners, wall too close (see picture 1)
I have tried to pull the (gas) stove away from the wall to raise all four feet under the stove but I fear the pipes are too tight.
I would prefer to avoid involving the landlord.
I would also prefer not to get a propane burner so if I want to do this on my stove, can I getaway with a ring to raise it? (see photo 3)
I bought the boil kettle thinking I might do all grain down the road so it's large in width (14.5") and volume (42qt) but not a super tall pot.
I've been in one house fire, I don't want to be in another so ... thoughts?
TIA,1
Christopher
EDITED TO ADD: Can't use left burners, wall too close (see picture 1)
![12786851415_5995578b5b_z.jpg](https://proxy.imagearchive.com/907/9070bb81056fa6c5bc73881d942c094e.jpg)
![12786806173_1c5812393f_z.jpg](https://proxy.imagearchive.com/278/278aa7b9e3753c816b808f1b2437a9f4.jpg)
![12787162024_988f438171_z.jpg](https://proxy.imagearchive.com/c5b/c5b51619730c8282f2ef204c32864b70.jpg)