Brewmasters Warehouse

[Rick500]

Just ordered stuff for a Stone Old Guardian clone and a simcoe/amarillo IPA. Hopefully will be brewing one of 'em this weekend, although I know I'm cutting shipping time close. (No pressure, btw! Seriously though, no pressure.).

 

[MikeG]

Just ordered stuff for a Stone Old Guardian clone and a simcoe/amarillo IPA. Hopefully will be brewing one of 'em this weekend, although I know I'm cutting shipping time close. (No pressure, btw! Seriously though, no pressure.).

Was it this Simcoe/Amarillo IPA http://www.brewmasterswarehouse.com/recipe/8381b826/mikeg-simcoeamarillo-iipa by chance?

 

[Rick500]

Was it this Simcoe/Amarillo IPA http://www.brewmasterswarehouse.com/recipe/8381b826/mikeg-simcoeamarillo-iipa by chance?

No, very similar recipe though.

I started with this one
https://www.homebrewtalk.com/f69/s-ipa-118158/
and kicked it up to about 8% abv.

 

[mattmainster]

Top notch service AGAIN from Ed and the crew at Brewmaster's Warehouse! Thanks guys!

 

[Brewmasters Warehouse]

Top notch service AGAIN from Ed and the crew at Brewmaster's Warehouse! Thanks guys!

Thanks man.

FYI we are now carrying Pin Lock kegs.

Ed

 

[cercueil]

Ed,

Do you know when the O2 regulators are coming in?

 

[Duster72]

Friendly suggestion: it would be really awesome if you had a "wish list" or "save for later" feature. That way when I know I need something small, I can throw it on my list and then add it to my order when I'm ready to get some more ingredients. Otherwise I have to leave myself notes and keep track of them on multiple PCs. Might be costly to implement, I don't know, but it would help me out.

Thanks again for the fantastic service!

 

[Brewmasters Warehouse]

Ed,

Do you know when the O2 regulators are coming in?

I will order some in, if people want them. I have not had anyone request them before this but I can certainly get some.

This goes for everyone if you want something I am more than happy to look into any product request. Even if it is something that we may not carry full time I will get something in for you at a good price if I can.

Thanks,

Ed

 

[fishnfever]

Ed, Keep up the great job on you shipping!! I placed an order on Easter Sunday and received it 4 days later. Grains were very nicely packed good service and product A+

 

[ArcaneXor]

How about some barbell stirbars?

Also, how far do you recondition your corny kegs? Cleaned, o-rings replaced and guaranteed to hold pressure?

 

[Brewmasters Warehouse]

How about some barbell stirbars?

Also, how far do you recondition your corny kegs? Cleaned, o-rings replaced and guaranteed to hold pressure?

We do not have barbell stir bars. Sorry we only have normal stir bars. If we get enough folks wanting them, you know I will get them in.

Are corny kegs, come in great shape. Completely clean, and guaranteed to hold pressure. We have been completely stoked at the condition our kegs have been in. We also just started throwing in a set of o-rings with each keg.

Thanks,

Ed

 

[Brewmasters Warehouse]

I also wanted to let everyone know that we have a complete new line up of products. This new line of products in not brewing related but distillation related. I know this is not the forum for that, so I will leave it at that. If you are interested we do have it though. Hey we are in the deep south, so you can not imagine how many requests I have had for it.

Thanks,

Ed

 

[ArcaneXor]

Thanks, Ed, I just placed another order. Think about those barbells, there were quite a few people interested in them in a thread over in the classifieds forum: https://www.homebrewtalk.com/f16/barbell-stir-bars-172019/

 

[keelanfish]

+1 on the barbell stirbars. I'd love to be able to see examples of them and find one that works with both 1/2 and 1 gallon glass jugs with convex bottoms. I know I could just go order them somewhere else, but I'd like the opportunity to come by the shop and see them, plus support BMW a little more.

 

[Brewmasters Warehouse]

I will take a look at the barbell sitr bars. That should not be a problem.

Thanks,

Ed

 

[Brewmasters Warehouse]

2 new hops in that are hard to find are now in stock. These hops are home grown from the Rogue Farms and used in Rogue beers. They are called Independent and Revolution. We should have these all year long, but I can not say for sure. I am looking forward to trying them out.

Thanks,

Ed

 

[lurker18]

I am going to be replacing shanks, taps, and tailpieces on my system. I have never done this before, can you help me in the measurements. Say for a 4 inch shank, what is 4 inches, the threads or from end to end.
Also, the tailpiece on my system is in a fairly tight place, how much more to the length does a straight and the 90 degree curve add.

And before I get too carried away, would you ship this to Canada with the good old USPS so I don't get bent over with the UPS surcharges?

 

[Brewmasters Warehouse]

I am going to be replacing shanks, taps, and tailpieces on my system. I have never done this before, can you help me in the measurements. Say for a 4 inch shank, what is 4 inches, the threads or from end to end.
Also, the tailpiece on my system is in a fairly tight place, how much more to the length does a straight and the 90 degree curve add.

And before I get too carried away, would you ship this to Canada with the good old USPS so I don't get bent over with the UPS surcharges?

We do ship to Canada via USPS, that is not a problem at all. The shanks lengths are listed from end to end. The straight tail pieces are 7/8" from end to end, and the 90 degree tail piece is ~1 3/8" straight out, and then down another 1 3/8".

Hope this helps,

Ed

 

[lurker18]

Perfect, I will have to measure up what I have and get a list together.

 

[Brewmasters Warehouse]

How about some barbell stirbars?

Just placed an order for some barbell stirbars. I will be carrying 2 lengths. 1 1/4" and 2". I will let you know when I have them in stock. Pricing will be $9.99 for the 1 1/4" and $11.99 for the 2".

Thanks,

Ed

 

[ArcaneXor]

Awesome. I'll definitely add those to my cart for my next order. Thanks, Ed!

 

[ArcaneXor]

The keg looks beautiful! And getting my orders within three days of ordering always rocks, especially when there is liquid yeast in there and the temps are rising...

 

[Duster72]

Hey Ed,

Please consider adding these to your store:

http://www.infusionspiral.com/

It's something I currently have to order elsewhere. Thanks!

 

[Brewmasters Warehouse]

Hey Ed,

Please consider adding these to your store:

http://www.infusionspiral.com/

It's something I currently have to order elsewhere. Thanks!

Sure thing I will look at getting some in.

Thanks,

Ed

 

[Brewmasters Warehouse]

Just placed an order for some barbell stirbars. I will be carrying 2 lengths. 1 1/4" and 2". I will let you know when I have them in stock. Pricing will be $9.99 for the 1 1/4" and $11.99 for the 2".

Thanks,

Ed

I have the new barbell stir bars in and ready to go.

1 1/4" Barbell Stir Bar

2" Barbell Stir Bar

Thanks,

Ed

 

[Rick500]

Just brewed my Stone Old Guardian clone yesterday... 77% efficiency into the kettle!

And that's with a single infusion mash in a 10 gallon Rubbermaid cooler, stirred by hand and batch sparged.

I have to attribute it to the crush. Thanks, Ed.

 

[cercueil]

Ed,

Do you have any O2 regulators and if so where are they on the website?

Thank you.

 

[ICanHazBeer]

I am not one to come out and publicly bash a company when things don't go quite right, but I am quick to come give them praise for doing right by a customer after a problem.

I recently placed my first order with BMW. The shipping was quick, the recipe builder is cool as can be, and the flat rate shipping and handling are pretty hard to beat.

I received my order last Friday night when I got home from work, there was a problem with what was shipped. Mistakes happen, and this was likely an easy mistake to make. I used their contact form to email them about the problem. Within an hour, it may have been within a half hour, Ed responded from his Blackberry with options for resolution and promises to make it right and apologized for a bad first experience.

Today, I received the product I had originally ordered. They sent it free of charge and allowed me to keep what was sent in error, rather than ship it back. They obviously value the customer and will do what it takes to make sure a customer is happy.

I wanted to make sure that BMW got the props they deserve. I look forward to placing many more orders with BMW. Thanks, Ed!!

~Paul

 

[MikeG]

Ed,

Do you have any O2 regulators and if so where are they on the website?

Thank you.

Is this what your looking for? http://www.brewmasterswarehouse.com/product/0102046/oxygenation-system

This is what I bought from BMW, it's the regulator and a stone as well.

 

[cercueil]

Yes. That is what I am looking for. You can't find it under Home»Equipment»Fermenters»Fermenter Accessories. I know Ed said it was out of stock last month but I don't know if he got any more in.