Bottling from taps - Perlick owners

[zachssoojdm]

Wort-O-Matic: Herb's No-Fuss Bottle-Filler

With a perlick forward seal you can use a corny dip tube.

Other than fill and go. I'd still be concern about bottling from it. Tap lines get bugs that will express themselves in a non-refrigerated bottle.

That's super smart especially if you had a #2 stopper on it. I just use a racking cane, to a tube right to the keg.

 

[Kealia]

So I take it there is no adapter for the 525?

I'll be upgrading my newly acquired kegerator taps to 525s for Xmas and was looking for an adapter for bottling. Up until now I've been using picnic taps and the "...stinking beer bun......" solution.

 

[DrHops]

So I take it there is no adapter for the 525? I'll be upgrading my newly acquired kegerator taps to 525s for Xmas and was looking for an adapter for bottling. Up until now I've been using picnic taps and the "...stinking beer bun......" solution.

Look on eBay, there are several sellers that have them for $11.85 with free shipping. You might want to check your LHBS as well. Brew Depot in Alpharetta Ga carries them in the store.

 

[DrunkleJon]

You can find them for $9 and change to $15 I use a section of tubing from my old racking cane. Works great, tight fit, no leaks.

 

[Kealia]

*sigh* Didn't even think about checking eBay. I mean, if it's not in this thread it clearly can't exist, right?

Thanks for the point in the right direction. Google turned up nothing (not even the eBay listings) but I've found them now.

Mahalo~

 

[itsratso]

why couldn't you just use this:

http://www.homebrewing.org/product....m=ProductAds&gclid=CPnZ1MKq97oCFZFaMgod7RIAJA

 

[Kealia]

Yes, that is what I was looking for and having trouble finding.

 

[DrHops]

Williams brewing has the adapter for $4.90 and $.45 for one foot of tubing for it. $5.35 total for it. I just ordered that and 16 new o-rings, 8 green for my gas posts and 8 black for my beer posts. With shipping it was just under $20.