• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Better Bottle Fermenters - 6 Gallon

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
DaBills said:
Does ported just mean a hole drilled in it?

Yes, but the hole can only be drilled by a very expensive diamond coated stepper bit to tolerances not to exceed .00001". In a sterile temperature controlled environment. You have have that setup at home? I thought not, which is why my offer should be that much more attractive!
 
Yes, but the hole can only be drilled by a very expensive diamond coated stepper bit to tolerances not to exceed .00001". In a sterile temperature controlled environment. You have have that setup at home? I thought not, which is why my offer should be that much more attractive!

I was just telling people where to get cheap BB's. I'm not interested.. LoL. But good luck with sale.
 
Forget the bottle, I want that "very expensive diamond coated stepper bit to tolerances not to exceed .00001".

Where can I get this bit?
Will you drop it off at my house for $5?
 
I'd be interested to know where this comes from:

"very expensive diamond coated stepper bit to tolerances not to exceed .00001".

That sounds like aerospace tolerances!
 
kh54s10 said:
I'd be interested to know where this comes from:

"very expensive diamond coated stepper bit to tolerances not to exceed .00001".

That sounds like aerospace tolerances!

Ya he forgot to mention his better bottles have the flight kit so they weightlessly hover!
 
I was watching one deal on ebay few weeks back. It was sold for 38 shipped with valve and racking adaptor but no closure or airlock.
 
kh54s10 said:
I'd be interested to know where this comes from:

"very expensive diamond coated stepper bit to tolerances not to exceed .00001".

That sounds like aerospace tolerances!

If the hole isn't cut to this exact tolerance, the gynaherpasyphilaids virus could squeeze in and ruin your batch. Source: me.
 
indibrewer said:
I was watching one deal on ebay few weeks back. It was sold for 38 shipped with valve and racking adaptor but no closure or airlock.

Damn, if I got my hands on that, I could've turned it around on here for $100!
 
I would take one without the closure and airlock but everything else. How much do you want for it shipped?
 
jbaysurfer said:
You're the one selling gear. The onus is on you to demonstrate value, not prospective buyers. LOL @ me contributing to this thread, but as I'm in the market for 6G better bottles I dared think I might find a "deal" on a used one!

$60 Brand new:
http://www.midwestsupplies.com/6-gallon-better-bottle-with-racking-adapter-high-flow-valve.html

Late for the party. Meh. Oh well.

I don't have to demonstrate squat. I put up the items and I set a price based on the cursory research i did of a few vendors at that time,, right or wrong. If an interested buyer points out to me that xyz homebrew supply is selling them for x price that's why you should sell them to me for y price, I'm likely to cut a deal. Unless you type things like "meh", then it's full price or no deal!

I've sold almost 10k worth of brewing stuff on this site, including these bottles, so its all good. No, I'm not a vendor.
 
beradthefish said:
I've sold almost 10k worth of brewing stuff on this site, including these bottles, so its all good. No, I'm not a vendor.

So in just 60 posts you've already sold $10k worth of gear on this site?
 
I don't have to demonstrate squat. I put up the items and I set a price based on the cursory research i did of a few vendors at that time,, right or wrong. If an interested buyer points out to me that xyz homebrew supply is selling them for x price that's why you should sell them to me for y price, I'm likely to cut a deal. Unless you type things like "meh", then it's full price or no deal!

I've sold almost 10k worth of brewing stuff on this site, including these bottles, so its all good. No, I'm not a vendor.

OK guy. You don't have to demonstrate squat.
 
Damn, if I got my hands on that, I could've turned it around on here for $100!

I've sold almost 10k worth of brewing stuff on this site, including these bottles, so its all good. No, I'm not a vendor.

So you're here to make a buck, not learn or contribute?
 
So you're here to make a buck, not learn or contribute?

There's no profit for me in selling all of the things I've sold this year, I'm just getting out of the hobby altogether. This was all of my equipment. I've participated mildly in this forum, extensively in others, and I've learned a lot throughout the years right here on HBT.
 
^ Dude just close the thread and stop power tripping already. It's the internet tough guy. Chill out. I came because I was in the market for better bottles. Why the hell are you here policing everybody? I guess you're all sold out of your 10k worth of product because anyone who came here interested in your product has gotten berated.

Unsubbed, get your juvenile last word power tripper post in...3, 2, 1....
 
^ Dude just close the thread and stop power tripping already. It's the internet tough guy. Chill out. I came because I was in the market for better bottles. Why the hell are you here policing everybody? I guess you're all sold out of your 10k worth of product because anyone who came here interested in your product has gotten berated.

Unsubbed, get your juvenile last word power tripper post in...3, 2, 1....

Blastoff!

I knew this was coming, the personal attacks, I guess I struck a nerve. I'm not power tripping, policing or berating anyone man, I'm just responding to posts in my thread as they come and I'm responding in an honest adult fashion. Now it's just a distraction for me to break up and lighten this evening's monotony. I'm not going to close the thread.
 
LoL I love this thread. A lot. I'm so glad it's still going after items are sold. NEVER CLOSE THIS THREAD!!
 
Just to point out, beradthefish is a Premium supporter, meaning he did pay real money to support this website.
So he has contributed.
 
Status
Not open for further replies.
Back
Top