M Merleti Supporting Member HBT Supporter Joined Dec 9, 2011 Messages 297 Reaction score 13 Location Orlando Mar 15, 2015 #1 I've seen the element in tubes and some in the pot itself. Where is your preference and why?
iijakii Well-Known Member Joined Jun 14, 2010 Messages 6,083 Reaction score 1,868 Location Portland-ish, OR Mar 15, 2015 #2 The tubes are for a RIMS system and something entirely different.
rwc_617 Supporting Member HBT Supporter Joined Jul 21, 2013 Messages 140 Reaction score 33 Location Madison Mar 15, 2015 #3 Better not to directly heat grain with a hot element unless you want to burn it. Use an element to heat fluids like water and wort.
Better not to directly heat grain with a hot element unless you want to burn it. Use an element to heat fluids like water and wort.
B branman Well-Known Member Joined Feb 12, 2013 Messages 286 Reaction score 37 Mar 16, 2015 #4 Use the element in a RIMS tube for recirculating, and in the hlt and bk for heating water and boiling the wort. If you are wanting a herms then you will need a coil in the hlt and won't need the rims tube (or 3rd element). Hope that helps
Use the element in a RIMS tube for recirculating, and in the hlt and bk for heating water and boiling the wort. If you are wanting a herms then you will need a coil in the hlt and won't need the rims tube (or 3rd element). Hope that helps
GilaMinumBeer Half-fast Prattlarian HBT Supporter Joined Jan 23, 2008 Messages 65,431 Reaction score 10,794 Mar 16, 2015 #5 On table, periodically.
Weezy Well-Known Member Joined Jan 1, 2013 Messages 2,673 Reaction score 625 Location Pittsburgh Mar 16, 2015 #6 Or go induction....