I have a berliner-weisse in primary right now and after 48 hours at 68F I have no signs of krausen. I have never fermented a kettle soured beer before, is this normal?
Here's my recipe and process:
4.75lb pilsner
3.5 lb white wheat
4 oz rye
Mashed at 147 for 60 minutes.
Wort gravity after mashing was 1.035.
I used a lacto starter that I made from 1.038 DME starter wort and a hand-full of base grain in a mason jar with no headspace, and I left it in my warm garage for 3 days. The starter pH was 3.2 and tasted cleanly sour when I pitched.
I purged with CO2 and used my carb stone to bubble CO2 through the wort before pitching, covered in saran wrap and left the kettle in my garage for 18 hours (when the pH dropped to 3.49).
I then brought the wort to a boil for 60 minutes (to boil off volume only, because I forgot the mash with less water initially).
Added .75 oz of hallertau and whirlpooled for 20 minutes before chilling to 65 and pitching 1 rehydrated sachet of US-05
I can see yeast activity like bubbling and swirling but no krausen.
Here's my recipe and process:
4.75lb pilsner
3.5 lb white wheat
4 oz rye
Mashed at 147 for 60 minutes.
Wort gravity after mashing was 1.035.
I used a lacto starter that I made from 1.038 DME starter wort and a hand-full of base grain in a mason jar with no headspace, and I left it in my warm garage for 3 days. The starter pH was 3.2 and tasted cleanly sour when I pitched.
I purged with CO2 and used my carb stone to bubble CO2 through the wort before pitching, covered in saran wrap and left the kettle in my garage for 18 hours (when the pH dropped to 3.49).
I then brought the wort to a boil for 60 minutes (to boil off volume only, because I forgot the mash with less water initially).
Added .75 oz of hallertau and whirlpooled for 20 minutes before chilling to 65 and pitching 1 rehydrated sachet of US-05
I can see yeast activity like bubbling and swirling but no krausen.