I have been following a thread and ordered a submersible pump and ball lock carbonator to mount on the pump (ball lock liquid QD fits right on the carbonator) to run BLC thru my 3 tap system, one tap at a time. This method will force beer the same direction as it normally flows thru the tap, then a return hose from the tap goes back in the cleaner filled bucket for recirc.
Another method would be to force beer backwards thru the open tap thru the beer lines thru the liquid out QD that has been disassembled. The disassembled QD returns the cleaner into the bucket for recirculation. I think either method would work fine.
Question: I have Perlick 650SS flow control taps. Will either of these methods clean these faucets well enough with 15 minutes of recirc that I won't need to break the faucets down to component level? Doing so would almost defeat the purpose of designing the recirc system as I see it. Thanks!
Another method would be to force beer backwards thru the open tap thru the beer lines thru the liquid out QD that has been disassembled. The disassembled QD returns the cleaner into the bucket for recirculation. I think either method would work fine.
Question: I have Perlick 650SS flow control taps. Will either of these methods clean these faucets well enough with 15 minutes of recirc that I won't need to break the faucets down to component level? Doing so would almost defeat the purpose of designing the recirc system as I see it. Thanks!