willatkinson
Well-Known Member
- Joined
- May 22, 2010
- Messages
- 56
- Reaction score
- 0
Do you know if they ever run specials or give out coupon codes? Trying to decide whether I should order, or just run up to Lowes.
Do you know if they ever run specials or give out coupon codes? Trying to decide whether I should order, or just run up to Lowes.
The only place I've found that rivals Bargain Fittings stainless part inventory is McMaster-Carr, and their prices are pretty high.
I live 15 minutes from McMaster's NJ Warehouse...AMAZING sight if you have never gotten to see it. It is enormous and super clean and organized.
In either case convience over price...hard decision!!
Plus I want to brew this afternoon and need a stainless bulkhead for my MLT.
That should work for that cooler but be sure of the wall thickness at the hole area. There is a little less play in the soldered version of the fitting kit.
NEW WELDLESS BULKHEADS MEASUREMENTS:
KEG - UP TO 3/16" THICK
Cooler with 1.5" Nipple - 1/4" to (1/2" without shim washers)
Cooler with 2.0" Nipple - 5/8 to 1" thick
Cooler with 2.5" Nipple - 1 1/8" to 1.5" thick
Cooler with 3.0" Nipple - 1 5/8" to 2" thick
Wayne
All price differences aside, if you were buying for your 10 gal cooler, would you choose the one with the silver soldered bulkhead instead?
Do you still prefer/recommend the original o-ring gasket for a kettle conversion?
Does the newer soldered style really place the gasket on the outside of the kettle or does the picture just look that way?
thanks
WOOT for BargainFittings.com Easy ordering, great price, fast shipping.
Ready to re-plumb my brewery now.
OLD thread i know but it seems Bargainfittings.com is no longer around to order parts for my 12 gallon rectangular Coleman cooler Anyone have an idea where else to shop?
What do you mean they are no longer around?
I just went to their website and it came up just fine.
Enter your email address to join: