Are draft towers always short on room?

[htims05]

My tower that I got used was a royal pain to assemble. The beer lines are so close to each other I hope they don’t impede the flow??

 

[bobeer]

that's how mine is. If you have a fan or someway to keep the tower cold you can probably remove the foam stuff to give yourself a tad more space to work with.

 

[htims05]

that's how mine is. If you have a fan or someway to keep the tower cold you can probably remove the foam stuff to give yourself a tad more space to work with.

The foam stuff is because I’m building the cooling fan for it. I had it removed when connecting the lines.

Just wonders if the inlets were that jammed together.

 

[BrewerBrad82]

Look at gooseneck tower shanks. Instead of the beverage tubing coming straight out, the goosenecks point the barb straight down to give you a lot more room to work with.

 

[bobeer]

daaaaaaaamn!^^^^ might have to put those on my xmas list this year.

 

[lump42]

$13 a piece for stainless at williams brewing
$9.79 at ritebrew, but doesn't state if they are stainless or brass