Anyone know if a 12" long 1.5" TC carbonation wand exists?

[hezagenius]

Looking for a 1.5" TC wand, maybe 12" long, with a carbonation stone on the end. Preferably with a gas ball lock post on the TC end, but NPT would also work. I want to hang it down from the top of my fermenter to free up a port on the side of my conical.

 

[CodeSection]

Looking for a 1.5" TC wand, maybe 12" long, with a carbonation stone on the end. Preferably with a gas ball lock post on the TC end, but NPT would also work. I want to hang it down from the top of my fermenter to free up a port on the side of my conical.

Perhaps this will work https://conical-fermenter.com/SP8CS-EXT10-8916-Carbonation-Stone-8-with-extension.html

EDIT: Here are two more:
https://www.morebeer.com/products/morebeer-pro-tank-replacement-carbonation-stone.html

https://www.gwkent.com/carbonation-assembly-8-or-12-with-tank-extension.html

 

[hezagenius]

I like that first one from stout. That's what I'm envisioning, except a smaller stone.

 

[CodeSection]

I like that first one from stout. That's what I'm envisioning, except a smaller stone.

Ok. Consider making your own with this https://torontobrewing.ca/products/...lamp-fitting-1-5-tc-x-1-4-mfl-1-4ffl-interior, some tubing and this https://www.morebeer.com/products/oxygen-stone-05-micron-14-barb.html

Maybe a call to MoreBeer's Pro desk might help. Since they custom make this https://www.morebeer.com/products/stainless-triclamp-15-oxygenation-stone.html, it shouldn't be hard for them to custom make one longer such as 12".

 

[hezagenius]

Yeah, I was thinking using those parts (TC with a gas post, silicone tube attached to the diptube, and a stone x barb fitting). I figured 15 psi might blow the stone off the tube though.

 

[exit8]

Make your own. drill a hold in a blank cap and use one of the SS wands and then silver solder the length you want it. This one was modified from an old Williams Brewing wand.