Hey Everyone, a hard moment but up for sale is my 220v all electric brewing setup. With 2 kids and having just moved, its time to downsize. This has been a great system, super easy to use and makes brewing a joy.
So Lets start with the table, its a stainless prep table with wheels. Built a custom water and chiller system to it. Water flows through a filter and you can manipulate the valves to move it into the HLT. BK or run through the chiller. *Note* did have a freezing issue and had to cut a small section out, you would need to solder in a new piece.
The brains of the system are the 30 Amp electric control panel. It was professionally built and only used the best parts. Auber PID, timer and internals. It has switches so you can control the March pump, or any aux electrics you may need. Has a timer with alarm.
That panel controls the two 5500w heating elements. Built with Brewers Hardware components and fit into the kegs with tri clamps.
HLT and BK are converted kegs with welded tri clamp fittings. HLT has a temperature probe ( which feeds into the panel) and a sight glass fitting.
Next is mash tun. Converted cooler with screen. All the pieces have stainless quick connects. Also included is a march pump and high temp hosts with quick connects
All in all this is an awesome system, so many great parts' i'm sure I missed some.
Located near Princeton NJ
Price $1500 and ill entertain all reasonable offers.
Ill also include
Kama Citra Session IPA All-Grain Recipe Kit
Caribou Slobber All-Grain Kit
Irish Red Ale All-Grain Kit
and Im sure a bunch of other odds and ends I find. See images below, and at this link (http://imgur.com/a/YMu4x) for more! Feel free to ask any questions
So Lets start with the table, its a stainless prep table with wheels. Built a custom water and chiller system to it. Water flows through a filter and you can manipulate the valves to move it into the HLT. BK or run through the chiller. *Note* did have a freezing issue and had to cut a small section out, you would need to solder in a new piece.
The brains of the system are the 30 Amp electric control panel. It was professionally built and only used the best parts. Auber PID, timer and internals. It has switches so you can control the March pump, or any aux electrics you may need. Has a timer with alarm.
That panel controls the two 5500w heating elements. Built with Brewers Hardware components and fit into the kegs with tri clamps.
HLT and BK are converted kegs with welded tri clamp fittings. HLT has a temperature probe ( which feeds into the panel) and a sight glass fitting.
Next is mash tun. Converted cooler with screen. All the pieces have stainless quick connects. Also included is a march pump and high temp hosts with quick connects
All in all this is an awesome system, so many great parts' i'm sure I missed some.
Located near Princeton NJ
Price $1500 and ill entertain all reasonable offers.
Ill also include
Kama Citra Session IPA All-Grain Recipe Kit
Caribou Slobber All-Grain Kit
Irish Red Ale All-Grain Kit
and Im sure a bunch of other odds and ends I find. See images below, and at this link (http://imgur.com/a/YMu4x) for more! Feel free to ask any questions
Last edited:
