I don't get anywhere near what day trippr seems to get. I get 5-8 kegs from a fill up on my 5# tank.
I don't get anywhere near what day trippr seems to get. I get 5-8 kegs from a fill up on my 5# tank.
When I started looking it seemed the rule of thumb is to assume a usage of 1lb co2 per batch when force carbing and serving.
I found a used 20# tank full for 80. Good deal?
I bought a full used #20 tank for $60 which was within the certification period and I thought it was a pretty good deal based on the others I had seen for sale on CL. It only costs $18 to fill it as opposed to $12 to fill my 5# tank.
I force carbonate everything and I last filled my 20# tank 20 batches ago. It is hard to tell how much gas remains using the regulator but I think I've still got quite a bit left. All bets are off if you have a bad gas connection to a corny as you can lose an entire tank in no time.
I bought a full used #20 tank for $60 which was within the certification period and I thought it was a pretty good deal based on the others I had seen for sale on CL. It only costs $18 to fill it as opposed to $12 to fill my 5# tank.
I force carbonate everything and I last filled my 20# tank 20 batches ago. It is hard to tell how much gas remains using the regulator but I think I've still got quite a bit left. All bets are off if you have a bad gas connection to a corny as you can lose an entire tank in no time.
Get a 10# if you can. The difference between 5# and 10# fillup is like $5.Plus they never run out. I run a two tap system and fill my tank 2 times a year. Three at the most. It cost me $25 twice a year...Its a non issue money and fill wise
Get a 10# if you can. The difference between 5# and 10# fillup is like $5.Plus they never run out. I run a two tap system and fill my tank 2 times a year. Three at the most. It cost me $25 twice a year...Its a non issue money and fill wise
I found a used 20# tank full for 80. Good deal?
...I got a 5lb tank with a used dorm-sized kegerator....
Very good deal. I found a used 20# for $100 (empty). The seller was nice and he threw in a used corny ball lock keg.
Most places swap out the tank when you fill it so always get the cheapest ugliest tank because after the first fill youll have a different one. Make sure its not out of dateI actually talked the seller down to 65. It's an aluminum tank also
Most places swap out the tank when you fill it so always get the cheapest ugliest tank because after the first fill youll have a different one. Make sure its not out of date
Any reputable gas place should be dead on. Mine are always within 1/10 of a pound of the rating on the tank. ( I weigh them when I get home)Rather than starting a new thread, I'll just veer this one wildly off-topic. Ain't I a great guy?
QUESTION: for those already in the thread, what do you consider to be an "adequate" fill of CO2 in, say, a 5# tank?
Why I ask: the nearest place to get a fill charges $25 for a 5# tank, ugh. The place about 10 minutes further down the road charges only $14. I went there and walked out with two tanks. When I got home, I weighed each one and compared against the tare weight stamped on the cylinder. I got 4.5# for one tank and 4.75# in the other.
So, on one hand, they're both definitely less than 5 pounds. OTOH, even the worst of the two is only 10% short. Even if they short me that much every time, I'm still WAY ahead vs. going to the other place, considering $/lb. How much of a shortage would compel you to complain?
Places that sell fire extinguishers and fire safety equipment will generally fill co2 tanks. The last time I got my 10lb tank filled it was like 16 bucks.