• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

California 25' immersion wort chiller eco 396 water pump and 20' copper coil

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mrgbu

Member
Joined
Jan 27, 2014
Messages
20
Reaction score
0
I had put together a homemade wort chiller system using these parts it shaved a few min on cooling the wort also didn't waste alot of water trying to cool my wort down. The idea was to shoot iced water from a 15 gallon tub filled with iced water through the wort chiller by using the submerable pump and upon exiting the wort chiller the hot water would go through the 20' feet coil that's submerged in the same tub of iced water being cooled down by the time it exited the coil and recirculated again through the pump into the wort chiller.
lines and tub is not include but you can pick up both for under 10 bucks at your local store

I'm asking for 60$ for all 3 and I'm also willing to part out doesn't matter
25' immersion chiller $40
20' copper coil $15
eco 936 submerable pump $15
willing to ship as long as you pay for shipping cost
parts are still fairly new letting go because I'm going a different route for faster response text me at 9512143839
I'm located in riverside

 
Back
Top