EsoChingado
Member
- Joined
- Nov 20, 2013
- Messages
- 15
- Reaction score
- 2
Finally making time to get together my brewstand, been at least 3 years of getting materials and time in order. Three years!!!
Way overkill on metal, 3/8" angle iron. It was donated, so can't complain. Have casters on the back end and removable handles in front to wheel the monster around.
Needs to be plumbed, which means attaching the manifold to the structure. Running BG14 for HLT and BK, BG10 for the direct fire MLT up top.
Made keggles (finally) with the good stuff from Bobby's BrewHardware. Had to notch out the MLT to fit in an ultimate sparge-arm.
Looking forward to using it in the next couple weeks!!
View attachment 1505576577031.jpg
View attachment 1505576618965.jpg
View attachment 1505577390618.jpg
Way overkill on metal, 3/8" angle iron. It was donated, so can't complain. Have casters on the back end and removable handles in front to wheel the monster around.
Needs to be plumbed, which means attaching the manifold to the structure. Running BG14 for HLT and BK, BG10 for the direct fire MLT up top.
Made keggles (finally) with the good stuff from Bobby's BrewHardware. Had to notch out the MLT to fit in an ultimate sparge-arm.
Looking forward to using it in the next couple weeks!!
View attachment 1505576577031.jpg
View attachment 1505576618965.jpg
View attachment 1505577390618.jpg