10 Jet Cast Iron Burners BRUTUS TEN build

[thisisbeer]

Do you like these burners now? I am starting my brutus build and was thinking about using them.

 

[spudsuds]

I finally got mine where Im happy with them but I had to use natural gas. I couldn't get them to work with LP.

 

[OBBrewery]

Great info Kalvaroo. Appreciate the posts. I have the 10 jet burners, can you explain the parts that you used to attach the pilot through the tab in the cast iron ring and to the gas line? What fittings secure it through the pilot light tab in the burner? Thanks!


Sent from my iPhone using Home Brew

 

[Kalvaroo]

On my first set of burners I drilled and tapped a hole to fit a small brass plug, in which i painstakingly drilled tiny holes in to use as the pilot. As far as the fitting on the bottom, I'd have to look at that again, but i used the inverse flair fitting for the gas line hose that I used. I would not reccomend making your own pilots, instead order these: http://www.topfoodservice.com/Merch...een=PROD&Product_Code=KECAP002&Category_Code= . When I replaced the old burners with these ones: http://www.topfoodservice.com/Merch...en=PROD&Product_Code=KECABJ001&Category_Code= . The guy called me for payment info and asked if i wanted to include those pilots, which I did. The new burners came pre-drilled and it was plug and play to the gas line hoses I already had. I'll take a look at the bottom and get back to you, or if you look at some of my older posts on this thread I think there's some good pics.

 

[Kalvaroo]

I finally got mine where Im happy with them but I had to use natural gas. I couldn't get them to work with LP.

I suspected you had the NG ones installed. I initially had the same issue... Glad you got it working.