Hey all. I'm building a system using one of PJ's great diagrams. He uses SYL-2352, but since I already had an Inkbird ITC-100v on hand I thought I would go with that. The snag I have hit is wiring in the flash buzzer and switch. The image below shows the ITC-100, SYL-2352 and the portion of PJ's diagram I'm dealing with.
On the ITC 1 and 12 should be equivalent to 1 and 14 on the SYL, but I'm trying to verify that #11 on the ITC is equivalent to #13 on the SYL?
Any help much appreciated.
On the ITC 1 and 12 should be equivalent to 1 and 14 on the SYL, but I'm trying to verify that #11 on the ITC is equivalent to #13 on the SYL?
Any help much appreciated.