Search results

Hi thorrak, Just fyi, got Fermentrack 2 to work with these 30 and 38 pin dev kit modules. System up and running with LCD display. Just checking this doesn't have brewfather integration yet, as I can't find it anywhere within the system. Thanks

These are the boards I've got. https://www.mouser.co.uk/ProductDetail/Espressif-Systems/ESP32-DevKitC-32UE?qs=GedFDFLaBXFguOYDKoZ3jA%3D%3D&mgh=1&vip=1&gad_source=1&gclid=Cj0KCQiAqsitBhDlARIsAGMR1Rg3JoHirLW_kF9c9NU6xstesUQkL353fzO_4YkmQcTVUifsgU97ADYaAtk0EALw_wcB...

Hi @Thorrak. Looking to migrate to ESP32 from 8266 for fermentrack 2. Have a few 30 and 38 pin ESP32s that aren't Lolin D32 ones. For a non tech savvy person will the firmware be compatible with these?

Any suggestion for a semi-techy person or brand new install. Having problems with the tilt connection too so might just start again.

Hi all. First time using fermentrack in a few months, don't know if somethings changed. System works in that I can program a set temperature but when I try to log i get, Environment: Request Method: POST Request URL: http://192.168.0.19/devices/1/beer/create/ Django Version: 3.0.14 Python...

Looking for assistance connecting brewfather to fermentrack. In the online instructions they say Click “Add Brewfather Push Target” at the bottom of the page, however in my fermentrack it just says "add push target". I've copied the link under custom stream into target host and saved but data...

I'm considering buying a tilt and see Fermentrack has Tilt integration. Does Fermentrack fermentation profile support the use of the gravity readings from the tilt i.e increase fermentation temperature when gravity reaches 1.xxx? Thinking of using it for a stepped lager fermentation profile.

Can anyone here give some advice on tuning the control constants for fermentrack. Got my first build going in beer constant mode but I'm getting alot of cycling of both beer and fridge temperature. Probe is taped to the side of a glass carboy covered with a sponge as I don't have a thermowell...

Hello from County Durham. Just up the road.

Thorrak. Have got this built and now busy configuing. On startup I get 3 temp sensors, but I can only install 2 of them and the last one when attempting to assign says its lost the address. Any ideas?

Thorrak. Can you give the pin list for the wemos for the fermentrack build? I'm wanting to test the setup without the LCD while my PCBs are coming, just like I could for the brewpi without the shield.

I've ordered some 100ml pp centrifuge tubes 128x34mm from Alibaba. £1 each. But smaller than Petling. Will design the sled once I get these.