Search results

Hi :-) Take a look at my other project: iblopper.bubble-logger.com, here you just use a sound sensor to detect the blops to follow the activity to decide when to change temperature, dry hop. This can also forsee the gravity, but you need to make a midterm hydromter sample to forsee the gravity...

No, it just emulate the rapt pil signal into a TILT signal for those wishing to stay inside a tilt ecosystem (e.g. not to be forced into buying RAPT temp controller, etc.). But you could buy some Power Plug (Tasmota US Plug V2 | athom) and hence Spindelmate can trigger these into controlling...

Dear All, SPINDELMATE been updated till ver1.5.0. From version 1.5.0 You can use two different sensors to track the release of CO2 from your airlock and hence get a measurement of the yeast activity. In SPINDELMATE ver 1.5 and onwards the code contains support for both a MPU6050 for vibration...

Look here...

Hi Bloom, I dont see anything on user 1390#### commming into the CLOUD. Hence, first question is if you did put in your wifi credentials in the logger, e.g. user/pass for the router into the logger? You would not be the first to forget this :-) Else please provide a serial extract from...

After you flashed it and assumingly it went well. Then the SPINDELMATE should come up with an AP (Wifi Access Point) where you can set it up for your wifi-network. Please do so. Here it should after power on (and please remove it from power once more before continue) show a WiFi Access Point...

.

Dear bloombrews, you cannot have more than one "spindel" or floating hydrometer on each ESP32 in regards of SPINDELMATE. Hence, for getting your RAPT PILL up an running you need one ESP32 DevVersion1 and you should be good to go. This was developed from a bluetooth point of view assuming...

SPINDELMATE version1.4.0 Updated code for PILL identification as KEGLAND changed the RAPT Pill telemetric data, and hence, need new way to identify RAPT Pill´s. Therefore, please use "100" at "TILT Color/RAPT Pill/iSPINDEL" at setting. This find all RAPT Pills and hence if you have more than...

ok, so this number will tell you how much the pill moves/jitters around and hence something on the activity of the yeast/fermentation?

Hi there, it seems that after the firmware release of 17 march 2023 Kegland has changed in the telemetecic data , and hence, from firmware 20230317_094939_9285ef0 SPINDELMATE cannot read the bluetooth signal of the RAPT PILL..........I havent had time to look into it and hence unsure if I can...

UPDATED till ver1.1.0, and now supporting iSPINDEL too.

Dear Kegland, thanks for reaching out, always nice to be noticed by the pro´s :-) I will try contact you, but in general this is meant as spare-time project (and so is iBLOPPER). If I would ever make some business over TILTPILLMATE, it would be by people doing the DIY building themself of...

Hi there, I guess it a good place to post about this new project: https://www.homebrewtalk.com/threads/tiltpillmate-yet-another-tilt-hydrometer-and-rapt-pill-datalogger-and-temperature-controller.725163/

HOME: GitHub - kbaggen/SPINDELMATE: A ESP32 Hub for iSPINDEL, Tilt Hydrometer and RAPT PILL. SPINDELMATE is a fermentation logger capturing the TILT hydrometer or RAPT PILL data of gravity and temperature by Bluetooth or WiFI signal from iSPINDEL. Furthermore, it is a cloud service allowing to...

LAtest brew: https://bubble-logger.com/line-chart/share.php?Brew_no_id=185

Someone is brewing --> iBLOPPER - IOT Fermentation logger and I brew: iBLOPPER - IOT Fermentation logger https://share.brewfather.app/uG5R9qMcXwZPkK

Brewing "Raw" Havtorn Hedelands Hvede ver2 https://bubble-logger.com/line-chart/share.php?Brew_no_id=183 https://share.brewfather.app/xXpxQF6MPNc89J

Brewing NEIPA: https://bubble-logger.com/line-chart/share.php?Brew_no_id=180 https://share.brewfather.app/zMjZSXQxP1X330

Hi All, I just wanna promote my free fermentation logger there is a DIY Platto, or just an "outside of fermenter" alternative till iSpindel/Tilt. I posted about it before, but now I guess it is now final. If anyone wish to test and be a beta tester, then please let me know. iBLOPPER – iot...