Search results

I want to get rid of it all. Moving in a few weeks and it all needs to go. Asking $200 but it must go so make me an offer. Carboys, Steel Pots, Steel Brew Buckets, Electric Kettle, Caps, CO2 tank, Capper, BIAB sack, Transfer Pump, wort chiller , Star San, Kegs, Bottle Tree, Automated Carboy...

I am pretty sure I have a setting wrong. I am very new to electric brewing. I have a n2006 PID and a pt100 sensor. I have followed the setup instructions that came with the PID and everything seems to work fine when I get closer to boiling temps. The issue is that it takes an...

I forgot to put my extract in the fridge when I got a week or so ago. The house temp runs about 65 I am assuming I need to toss it and replace it. Is that correct?

Guilty on all accounts I didn't have the spray head I wanted for pot so I didn't recirculate this time around. I will play with my setup this weekend and get it dialed in Thanks

I made my first batch with my new setup and am now a bit unsure about how to use my setup properly. I am using a 15 gallon pot with a PID temp sensor and valve 1.5" from the bottom of the pot and a 4500 watt heating element just slightly above that. I have a false bottom set up just...

I just got a new Cast Iron burner. I tested it and it works just fine but after about 1-2 minutes it flames out the backside of the burner where it connect to the hose. Where it is flaming out it looks like there are 3 triangles for letting in air. Do I need to adjust these and open...

When I add the sugar should I oxygenate again or just put the sugar in and let it be?

If I were to add sugar I would do it in the primary and not the secondary, correct? I was going to rack it on Sunday from the Primary to the secondary 15 days since brew day

Long story short I was brewing a Belgian Dark Strong that should have been about 1.08 going in to the fermenter. Instead it was 1.055ish. In a nutshell the local home brew shop who I bought the "kit" from neglected to give me the 2 pounds of sugar I needed to complete the recipe. At...

Unfortunately I am traveling for 2 solid weeks . I am tempted to throw a smaller amount of hops in but that would force me to bottle the beer after only 2 total weeks of fermentation. I think i am going to wait and bottle when I return.

I have already removed the beer from the primary and moved it to a secondary. I did this by racking. I normally check gravity twice before bottling or going to secondary to check for completion but I wigged out this time due to my desire to pull dry hops as the directions stated.

I should have dry hopped a week after I started my primary. Instead I dumped my hops in with the yeast. (Instructions were unclear) I needed to pull hops today so that required going to a secondary. I am not fully finished in fermentation. I am torn as I will have to either bottle...

That is a great idea Is the flat bottom stainless and do you have a link on where to buy That plus a few 4" screws and I would be in business

I have my new SPIKE Brewing 15 gallon pot and love it. Now that I have it I am realizing to finish it I would like to install a hop blocker and some sort of steaming stand to keep the brewing bag off of my heating element. My heating element will be about 3 1/4" from the bottom of the...

I want to run a 50 amp 240V circuit to my garage for brewing. My service panel is exactly on the other side of the wall from where I will be brewing so wire run will be short. 3-4 feet I know I will need a 4 wire setup so I can run both 120V and 240V at the same time. I am going to most...

assuming it will take a 6.5 carboy per fridge would you take $200 I can pick up tomorrow

Ordered kettle from Spike with tri clover pre installed for element. Heating element - camco 5500 watt procured and brewers hardware elements install kit for tri clover ordered also. Now if I can just get my wife to let me brew in the laundryroom:)

I live in Elk Grove My interest is one of the heating elements and the hop stopper Can I get a picture of both I have a tri clover attachment on my pot - assuming your element is set up for weldless if it is like the electric brewery setup

I think SPike brewing is my answer. Good quality and can get a 1" or TC added without me having to mess with it

I think I am going to purchase a spike brewing 10 gallon pot for BIAB with 2 horizontal 1/2" fpt and a custom upgrade to a 1" fpt for the element install My questions are as follows: 1)Will I regret not spending the additional $40 to go to 15 gallon pot even though I will be doing 5 gallon...