Search results

I ran into basically the same problem as the OP today. I have a 14g pot, but I am wanting to make 9.5g of beer, so the water+grain is too much for my 14g to hold if I don't add water. I used an old refigerator grate that rests on top of the kettle after pulling the grains out, I set it on...

I did not end up using a regulator. There is a ball valve at the gas main and another one on the connection point. The male end in pic goes into gas line coming out of the ground.

Nice, I’ll take a look. Thanks for the response!

Does anyone have a good recommendation for a decent kitchen/hops scale that is accurate. Just bought one off amazon and it is complete trash, had to return it, they all kind of look the same to me...

Hmm well at least I can return the washers if they don't work, maybe i'll try nukatap or intertap.... @Bobby_M does brewhardware have anything you would recommend?

Sorry to revive such an old thread but do you know what o-ring you used to seal this? My brand new perlick is leaking when I connected it to a brand new Krome dispense shank. Same perlick does not leak on my kegerator, just on this new shank. I"m reading there are some incompatibilities, just...

Something like this maybe? Amazon.com: Beer Gaskets,50 Pieces Keg Tap Line Washer Black Rubber Coupling Gasket for Beer Seal?1/8 inch Thickness ?: Home & Kitchen

Oh no ok so is there a way to fix it, maybe another gasket? EDIT : It's a krome brand C291 shank

Very strange issue i'm running into with my new kegerator build. I put my brand new perlick taps on the shank and when I hook the beer line up it leaks like crazy out the holes where you tighten. I tried loosening the collar, tried tightninig it as much as possible, tried loosening the shank...

Ok thanks, yeah i just didn't have it tight enough, and the keg had 30 psi pressure in it as well, once I de-gassed the tank and turned the regulator knob it worked.

Ok sorry never mind I just figured it out, just had to play with it a bit to get the right setting...

Ok I just got these duotight inline regulators (with integrated gauge) or my keg fridge build. I have them all hooked up in series ( see picture ), gas line connected and set to about 35 psi. the issue i'm having is when I turn the yellow regulator knob it doesn't have any effect. All the...

Anyone here brew cold brew at home or professionally? I brew in a 5 gallon bucket, and have been using these : Amazon.com: 50 PACK Commercial Cold Brew Coffee Filters, Brew Up To 5 LBS Coffee, 20" x 20" Fits 5 GALLON Commercial Cold Brew Systems: Home & Kitchen They work well but they are not...

I had the same experience trying to convert a small fridge into a kegerator. Coolant lines were all over the back and sides of the unit, did the same thing you did, small hole poke around didn't sense anything, then drilled a slightly larger hole and nicked the line. Bought a purpose built...

Ok so i got the evabarrier and all the connectors finally. Force carb'd the water by shaking for 3m at about 50 psi. Let it rest for an hour or two and tested. Regulator set to 35 for serving, and it's coming out nice and sparkly which is great but there is still 'sputtering' going on as it...

In working to connect evabarrier 4mm to my keg I needed to use a MFL quick connect ball lock, which has a 1/4" (screw in) type connector. You then use a duotight fitting to connect the MFL to the line. The other end of the line I am using a pluto tap. The EVAbarrier doesn't 'naturally' go on...

Is there any difference in the way it's coming out now vs before? I assume you are keeping 35psi on all the time? If that is the case it should be well carbed... Do you think there is perhaps some turbulence being introduced with the tap or the post/poppit?

I have a drum roaster that i use with my grill, capacity is 7.5 max so I usually do around 6 at a time and usually only need to do that once a month. Right now splitting between decaf and regular. Here is a link to my roaster : 6 lb Coffee Roasting Drum | RK Drums - Professional Batch...

I have been doing maybe 6 green pounds a month. My wife and I use half of it for cold brew, and the other half I sell off to friends. So probably 70 or so pounds in 2022. I get my beans in bulk from Bodhi leaf importer maybe 60+lb at a time. I'd try to sell more but it's a pain to keep...

Thanks for the response! So based on what you are saying unless you drink it quickly or keep it at a high PSI it will eventually equalize the pressure with what is in the solution ( assuming typical serving temps, etc ). I hear a lot of people saying they force carb at 30-psi, then serve at...