Search results

Could be. I recall a thread debating their quality of SS. I still think a 42mm bit would be better. Anyone else install a 2" yet?

Correct, hole was too small, but I used the bit he said to use. It was a bare to flare and used tons of solder to fill. It looks fine after solder and is water tight. Just think a larger bit is needed.

Looks like I @ the wrong person, @Bobby_M

@Bobbym is the 40mm tungsten too small? Just pulled my 2" through, was crazy hard. It bent the fender washer. It also split the flared walls. This is a Concord kettle, so only 1mm thick

Photo would not load first time

Finally did mine, used these stencils, worked well, had to cut triangles. https://www.amazon.com/gp/aw/d/B01IRLZURQ?psc=1&ref=ppx_pop_mob_b_pd_title

Says Shutterstock. That is the water mark of the owner of the image

Avanti 1/4" tubes Inline Shut-Off Valve for drinking water filter RO reverse osmosis - 1/4" tube x 1/4" tube, quick-connect fittings - QF-BVI04 (Pack of 1) https://www.amazon.com/dp/B07HYJX2B7/?tag=skimlinks_replacement-20

Stainless https://www.beveragefactory.com/draftbeer/hose-fittings/shut-off/7419-1.shtml

Not sure if these can shut off flow https://www.kegoutlet.com/ifcc-in-line-flow-control-compensator.html?gclid=EAIaIQobChMIhuukpJXX4AIVA0CGCh25iQGZEAQYBSABEgInSPD_BwE Lots of keg shutoff options https://www.kegworks.com/shut-off-valve-for-keg Bobby m sells disconnect to reg keg nuts

I added a smaller choker line at my tower, as my draft lines were 3/16 or smaller stainless and in had to step down the 1/4. I would think adding then at the keg is better and you can start with 8 or so feet and cut down as needed. I have been running my long draw system for 6 years, happy...

John guest https://www.chicompany.net/index.php?products_id=2461

Also, I would strongly suggest buying premade trunk line https://www.chicompany.net/index.php?products_id=1017 Also chi carrys all John guest fittings for 1/4. Those are hard to find Edit, links are not working, edited them to what would work

Chicompany is probably your best. https://www.chicompany.net/index.php?main_page=product_info&cPath=375_86_87&products_id=2422 I use Eaton brand 1/4. I will warn you, my 27 ft hold about a beer. After a week or two of sitting in the line, you will start to see oxidation.

Forgot -photo

Got my 2" flaring tool, cant wait to install the ferrule Also needed a 1/2 half coupler for my temp probe, was going to dimple and then pull a half coupler, but made one by cutting the Male threads off a m/f pull through fitting. Pretty easy to hacksaw off, bench grid and sand smooth.

PM your address and will try to ship it tomorrow

They are for sale! https://www.brewhardware.com/product_p/ptbulkhead_tool2tc.htm He also added 2" long ferrule

I got one, nib, got it when they first came out. How about 60 shipped?

Overnight mash is the way to go. Nice time saver and helps break up then process.