Search results

I just plop mine in the top though the TC in the lid but I do find my v4 iSpindel a little better though.

That looks super Juicy, would you share the recipe?

Thanks, I only have the NorCal standard dump with the gas relief though.

Any reason why I could not pitch a yeast starter into the FV via a mason/ball jar which is the trub dump? Space it tight in the FV fridge and the conical weighs 50KG so lifting it out is an issue. I’ve made a starter (which is unlike me) with 3 packs of M44 in a jar which I can screw to the...

That is just heat from the welds that should have been cleaned up. Again, use BKF but with a green scotch brite pad. A stainless wire wheel or brush will also work.

They do all the 1/2” BSP adapters too so you can fit what ever you like to it.

This is a tasty looking CFC. https://www.brewtools.no/en/tilbehor/27-counterflow-cooler-pro.html

WRONG

Barkeepers friend will clean it off, use the powder on a damp microfibre cloth. Leave it it dry for a day with the residues still on the rinse off.

It looks to me quite high watt density meant you will have a lot heat over a small surface area. Here in the uk ULWD elements are popular due to the extremely low chance of anything burning. https://www.brewbuilder.co.uk/3kw-lwd-ripple-element.html

Unfortunately the shank screws into the tower so anything with a barb will not turn. The 3/16 shanks I have are just a push fit end as those are the only ones that will screw into place.

Looks like tin worm to me. As above scrub with Bar Keepers friend and let it sit overnight before rinsing.

Hi, the push fit needs to be built into the shank as I don’t have the space in this particular tower for that adapter. The ones I have are 3/16 which are too restrictive.

Has anybody seen any 5/16 push fit shanks? UK friendly shipping would be advantageous but I do know somebody who could pass them on.

What an amazing colour. Would you share the recipe?

It must have been fermenting still, you cannot over carbonate if you have controlled the variables.

I’m not on Facebook and never will be. Mine is now sat in my garage so I hope the other users visit the forums. Congratulations on the purchase, I feel insane ‘pulling the trigger’ as you guys say but it will see good use for the best decade or so hopefully.

Did anybody find out what happens to Millars? That was some seriously well made mill.

I like these, http://www.micromatic.com/draft-beer/easy-pour-standard-faucet-stainless-steel-body-4933roto Not had any in my had yet but will swap my 650SS taps out when I rebuild the bar if they are available.

Import taxes into the UK over £300 bringing it over 2K. Or $2800 with the starter pack. No owners on here or any of the UK forums I can find unfortunately.