I am by no means an expert, but I would suggest based on my own recipe creation difficulty to be careful when you add many types of malt. I made an irish red recipe with gravity a little lower than yours, but when it finished I found it was hard to isolate the different flavors of the various...
Thanks for the suggestion on the Eva-dry, I will pick some up when I get out to Colorado. Hopefully I won't need it as much as this, though, since it is way dryer.
The strange thing to me is the sheer volume of water since it filled the bottom of my freezer. There must be 25 gallons of water...
A little while ago I built a keezer like the classic jester type. It stayed in the garage even though it looked awesome mostly because I was lazy and never got around to moving it to the living room. Today I went to clean it out for my movers tomorrow and take the kegs out and clean the lines...
That's how I did it, but I used the automatic installers for both. Basically I wanted someone who types in the address on my LAN to only have the pints page for ease. On the installer for BrewPi I just changed me default setting when it asks where you want to install the web information to...
There is a calibrate command you can send to the arduino from the command line if you are good with that kind of thing.
http://forum.brewpi.com/discussion/448/temperature-probe-calibration/p1
If you aren't good with the command line I wouldn't recommend screwing around with this. But if you...
Does this display work off the hdmi port or do you have to plug in a USB also? I read some of the displays for windows 8 now require it I but I don't have one to spare on my pi.
Sent from my iPad using Home Brew
I went by radio shack and got one of their black project boxes and plan on putting it in there. To attach all the components I got Velcro with sticky backs so it doesn't mess up the underside of the circuit board. Haven't put it all in yet but will sometime this week.
Sent from my iPad using...
Bkcorwin - it has a bunch of files with dependencies and the program that made everything was for atmel chips, so the arduino program doesn't like the format.
Thank you Yuri for a really detailed suggestion. I was trying to avoid it but I think it is the easiest way. I installed cross pack...
Yup, totally working! I've got raspberry pints and BrewPi running at the same time and am doing a test run of the temperature controlling part to make sure i didn't mess anything up. Don't want to hook it up and have the beer go bad! Tonight I'll put it all in a project box and actually hook it...
Howdy all,
I just got done getting temp controlling and everything done on my arduino and raspPi. I want to add some code into the BrewPi arduino code but it is written in Atmel Studio, which is only for Windows (I am on a Mac). Has anyone done any type of modifications to the brewpi code...