My f-i-l suggested that I get a muffler clamp at an auto parts store. I ended up using parts from that as well as the u-bolts from lowes. My pump is permanently fixed at the moment, but I have the parts to disconnect as well.
What did you use for the backside of the u-bolts? I scoured lowes and home depot and can't find anything like them? I'm specifically talking about the pseudo curved pieces that go through the u-bolt arms and provide the clamping pressure on the table legs.
All -
I am installing my single compartment sink with drainboard. I have it leveled side-side/front-back, but the backsplash has a noticeable pitch away from the wall...
All,
I'd like to move beyond the basic inkbird temperature controller in order to save and track my temperatures during fermentation and cold crashing. I was considering building a craftbeerpi controller to do just that. The advantage is that i can monitor my diy glycol chiller temperature and...
If i'm not consistently brewing, should i continue to keep the chiller plugged in and cycling to prevent any sort of fungal or bacterial growth in the cooler?
If you are referencing the straight line near the pinched tube, that is just a surface scratch. I was trying to reshape the copper with pliers and padding but the Jaws went through the padding.
So my chiller build is not going smoothly. For reasons I don't want to talk about, I pulled the wrong fins off and set them into the cooler. It was at that time that I realized that I had the wrong one so I started the process of getting it back in place. I was able to get the fins in place but...
I'm building a DIY glycol chiller and i keep seeing people putting a temperature probe into the glycol bath. I feel like this is a dumb question, but what's the purpose of the probe in the bath? I assume that i want to have my probe in the thermowell of the conical and that's it.
This is a new in (opened) box plastic conical. It wall mounts (included) or a base can be purchased separately.
I'm asking 70. Shipping would be additional, but can be discussed.
Located in Fredericksburg, VA