I did something similar on a keggle and had problems with the pump losing prime due to the air pulled in thru the sight glass.
i think it was because the path of least resistance was thru the SG.
YMMV
jb
Many regulators are not “relieving” style regulators.
For example If you set regulator to 25psi on a keg, then reduce the pressure by turning the adjusting knob nothing will happen unless you open the pressure relief valve venting the built up pressure. In a self relieving regulator lowering the...
If you cut the handles off I would seal with silicone or epoxy ..
I had considered running a length of small cable with ring connectors crimped on, between two short heavy sheet metal screwed into the sloped area of the upper and lower handle where it blends into the body on both sides to...
Need a solution for the annual beach trip. Normally I load up the kegerator and haul it and the kegs several hundred miles. Getting too old to do that now. This was a perfect compromise. I picked up an old 10gal Home Depot cooler at the flea market for $5. It was faded and beat up, as well as...
My poor wife gave up on me years ago, she is definitely a keeper....
it is a beast, took my son and I about 3 hours to get it in the basement with about .3" clearance on the door frame.
i would be very interested in details on how your partitioned and controlled the sections for fermentation...
D
I will stick my 2 cents in.
I have a standard kegerator with a 3 tap tower, a 2 door (glass) bar back a true gdm-72 and a 1970 over under fridge converted to a kegerator.
The kegerator is a pain for loading and routing the home brew lines. But it is relatively compact, about the right ht and...