Main question is as per thread heading. Secondary question is with my two stage undersink water filter which cartridges should I be using to remove chlorine and chloramines? Currently I have a 5 micron sediment filter and then a 0.5 micron carbon filter, both US made I believe. They are up for replacement and I was looking to bulk buy replacements to save some coin. Cheers guys and Merry Christmas!
Ward Labs Water Report
pH 7.9
Total Dissolved Solids (TDS) Est, ppm 185
Electrical Conductivity, mmho/cm 0.31
Cations / Anions, me/L 2.7 / 2.9
ppm
Sodium, Na 25
Potassium, K 1
Calcium, Ca 24
Magnesium, Mg 4
Total Hardness, CaCO3 77
Nitrate, NO3-N < 0.1 (SAFE)
Sulfate, SO4-S 4
Chloride, Cl 38
Carbonate, CO3 < 1
Bicarbonate, HCO3 98
Total Alkalinity, CaCO3 80
Total Phosphorus, P < 0.01
Total Iron, Fe < 0.01
Ward Labs Water Report
pH 7.9
Total Dissolved Solids (TDS) Est, ppm 185
Electrical Conductivity, mmho/cm 0.31
Cations / Anions, me/L 2.7 / 2.9
ppm
Sodium, Na 25
Potassium, K 1
Calcium, Ca 24
Magnesium, Mg 4
Total Hardness, CaCO3 77
Nitrate, NO3-N < 0.1 (SAFE)
Sulfate, SO4-S 4
Chloride, Cl 38
Carbonate, CO3 < 1
Bicarbonate, HCO3 98
Total Alkalinity, CaCO3 80
Total Phosphorus, P < 0.01
Total Iron, Fe < 0.01