California Complete 20 gallon stout all electric setup with jacketed conical fermenter for sale

[bemerritt]

California is in a drought. Don't have enough time. Not brewing enough. Need money for other hobbies. All of these reasons came up when discussing with the SWMBO that I wanted to sell my wonderful 20 gallon setup.

I will be selling this as a kit. I will not part out until I have at least sold the fermenter and stout tanks. You will not find a sale like this anywhere else.

Don't see some other things you would like? I probably have it if it would make sense with this setup. Feel free to pm with any questions.

I am located in Orange County, but will drive a considerable distance if it makes the deal happen and I get to visit some cool places along the way.

High level setup:
20 gallon Brewers Hardware jacketed conical fermenter - SOLD
20 gallon Stout HLT - SOLD
20 Gallon Stout MLT - SOLD
20 Gallon Stout BK - SOLD
4 Tap Keezer with SS perlicks - On Hold
4 way regulator - $150
5lb Aluminum CO2 tank -$40
2 Ball lock kegs - $130
Monster Mill MM2 with hopper and 1 hp motor.belt/pulleys - $350
Duda Diesel Plate Chiller - 120 Shipped
2 Stainless chugger pumps - SOLD
Stout oxygen system with tank and regulator - SOLD
BCS-462 - SOLD
Wifi adapter - SOLD
Control Panel - Need to break down, will list parts separately soon
GFCI circuit breaker - $30
DIY Glycol chiller (BCS controlled) - SOLD
DIY Stir plate - $30
5 Liter starter flask
2 Liter Starter flask
2 Still Dragon 2" Tri Clover adapters with 2 5500 watt heating elements and cable - $100
4 BCS Temp probes - SOLD
CIP system for corny and conical - SOLD
2 Vittles vault for grain storage - $20 each
2 Carboys - $15 each
Bench top capper - $30
hannah ph meter - $50
refractometer - $40


+ Everything needed to use all of this equipment (Tri clovers, butterfly valves, ball valves)

Overall system

Conical with psi gauge, ball lock adapter, butterfly valves, yeast harvester

HLT with two 2" ports (1 for element, 1 for included temp probe)

[imghttps://farm1.staticflickr.com/593/21841861740_48dbb058c4_z.jpg[/img]

MLT with bottom drain and false bottom

BK with whirlpool and two 2" ports

Monster Mill setup (Kennedy not included)

Control Panel

Hop Spider

Oxygen Setup

Chugger

Still dragon adapters with 5500 Watt elements

Keezer with stainless perlicks

$6500 takes every piece of brewing equipment out of my garage and into yours. It includes everything you need to brew. Even have a couple pounds of hops in the freezer. If you have a question about something I didn't list, just ask. I didn't list all of the tubing, tri clover connections, ball lock connectors etc., but its all here.

I put my heart and soul into researching and developing (I'm an R&D engineer by trade) this system, and I am sure the next owner will love it.

Hell, we can even brew the first batch together if you want me to walk you through it.

If I can't sell it all to one buyer, I will take offers on groups of items as long as it includes either the conical or the 3 stout pots.

 

[Geronimo13]

Wow, that is a fantastic setup. Having just finished putting my own system together using Bobby M's old kegs, I'll say it looks worth every bit of the $6,500.

 

[jcc4507fly]

If it comes down to it how much for the conical?

 

[normonster]

Holy **** you're insane to let that system go.

My.
God.
It's.
Beautiful.

 

[jimmayhugh]

MUST...LOOK...AWAY!!!

Nice system...

 

[Mountainsax]

Amazing setup! That is exactly what I want to build (hopefully starting to gather parts after the first of the year). I wish I was ready and had the cash now (and lived closer to you). You might try listing it on probrewer.com also. Someone might want it as a brewery pilot system.

 

[bemerritt]

If it comes down to it how much for the conical?

Definitely starting to look like I should sell this first, pair whatever that seller wants and then part out the rest.

conical price is hard. Retails for $1900 and is in perfect condition. Would like to try and get $1700 for it. can negotiate all of the accessories that go with it.

-Spray ball
-Sight glass
-casters
-spunding valve
-reducer
-cip pump
-oxygenation setup
etc.

 

[Edbeenbreto]

If your parting please let me know via PM I live a few hours away and don't mind the drive.

 

[90minman]

I would be in for the MT if you part out and would ship. Pm if your interested.

 

[sleepy_brewer]

Wow. Wish I could find this setup on the east coast!

 

[conglominoid]

How are the casters secured to the legs of the conical? Is the conical stable with the casters installed? It looks really top-heavy.

 

[Mountainsax]

If I can convince my wife I would take the whole setup, minus the kegerator. I'll send you a PM.

 

[bemerritt]

How are the casters secured to the legs of the conical? Is the conical stable with the casters installed? It looks really top-heavy.

Casters go into the legs and tehn you tighten a polt that squeezes a bushing tight inside the legs. The casters lock. Definitely top heavy and i am very careful when i move it. It was really awkward to move it without them, so i am glad they are there.

 

[bemerritt]

Getting close to a bundled sale of the pots, fermenter, oxygen setup and some other things.

Which means I am willing to part out the rest (minus the kegerator, I think i am keeping it)

Thanks!

 

[pocketmon]

Hi,
I am interested in
5lb CO2 tanks
Ball lock kegs

PM sent.

 

[DatBeerPhu]

Bump for a sweet setup!

 

[Edbeenbreto]

Hey located in San Bernardino very interested in the kegs please let me know.

 

[bemerritt]

Pots, fermenter, cip, hop spider, oxygen setup are all sold.

Kegerator and kegs on hold.

Everything else is available. I will work on prices for individual components.

 

[RandR+]

Interested in the BCS462 (and components)

PM Sent

 

[bemerritt]

I have updated the first post, but here is the list. As usual buy more and save

20 gallon Brewers Hardware jacketed conical fermenter - SOLD
20 gallon Stout HLT - SOLD
20 Gallon Stout MLT - SOLD
20 Gallon Stout BK - SOLD
4 Tap Keezer with SS perlicks - On Hold
4 way regulator - $150
5lb Aluminum CO2 tank -$40
2 Ball lock kegs - $130
Monster Mill MM2 with hopper and 1 hp motor.belt/pulleys - $350
Duda Diesel Plate Chiller
2 Stainless chugger pumps - $125 shipped (each)
Stout oxygen system with tank and regulator - SOLD
BCS-462 - SOLD
Wifi adapter - SOLD
Control Panel - Need to break down, will list parts separately soon
GFCI circuit breaker - $30
DIY Glycol chiller (BCS controlled) - SOLD
DIY Stir plate - $30
5 Liter starter flask
2 Liter Starter flask
2 Still Dragon 2" Tri Clover adapters with 2 5500 watt heating elements and cable - $100
4 BCS Temp probes - SOLD
CIP system for corny and conical - SOLD
2 Vittles vault for grain storage - $20 each
2 Carboys - $15 each
Bench top capper - $30
hannah ph meter - $50

I also have 20lbs of Maris Otter and several lbs of hops that have been kept in the freezer to sweeten any of the above deals.

 

[Lumpyyyyy]

Is the price of the heating elements total? Are they stainless? Are you parting out your control panel, is that what you mean by "need to break down"?

 

[bemerritt]

Is the price of the heating elements total? Are they stainless? Are you parting out your control panel, is that what you mean by "need to break down"?

Price includes the elements. They are these elements:

http://www.amazon.com/dp/B000BPG4LI/?tag=skimlinks_replacement-20

I am indeed parting out my control panel. Heat sink, gfci breaker, etc.

 

[Lumpyyyyy]

Price includes the elements. They are these elements:

http://www.amazon.com/dp/B000BPG4LI/?tag=skimlinks_replacement-20

I am indeed parting out my control panel. Heat sink, gfci breaker, etc.

Didn't see that it was 2" TC. I have 1.5" TC.

I am interested in control panel parts. I'll PM you with anything I'm looking for.

 

[bemerritt]

pumps sold. Added price of $120 shipped for the B3-23A 30 Plate Beer Wort Chiller with 1/2" npt fittings.

 

[bemerritt]

I have 9 (one not pictured) 1.5" tri clamp hose barb. Fits 1/2" ID hose perfectly. Retails for $15, I'll do $10 each and include the hose clamp. Buy all 9 and I'll do $80 shipped anywhere in the US.

 

[bemerritt]

Stirplate $30

pH Meter $50

Refractometer $40

I'll throw in a free yeast nutrient with each of the next two orders

or this

or this

or this

 

[Savagejair]

Still have 4 way regulator?

 

[jammin]

California is in a drought. Don't have enough time. Not brewing enough. Need money for other hobbies. All of these reasons came up when discussing with the SWMBO that I wanted to sell my wonderful 20 gallon setup.

You'd have been a lot better off just getting rid of SWMBO

 

[akthor]

Control panel details and price?

 

[bemerritt]

Sorry, everything besides some odds and ends are sold

 

[tnorman93638]

What do you have left??? Heating elements Tri clover fitting

 

[mikehoover]

What pump did you use for your CIP set up?

 

[reddskinnfan]

Where did you get that table???

 

[Matlockin86]

Still have your control panel?

 

[reddskinnfan]

I may be interested in the Mill. Sending PM.

California is in a drought. Don't have enough time. Not brewing enough. Need money for other hobbies. All of these reasons came up when discussing with the SWMBO that I wanted to sell my wonderful 20 gallon setup.

I will be selling this as a kit. I will not part out until I have at least sold the fermenter and stout tanks. You will not find a sale like this anywhere else.

Don't see some other things you would like? I probably have it if it would make sense with this setup. Feel free to pm with any questions.

I am located in Orange County, but will drive a considerable distance if it makes the deal happen and I get to visit some cool places along the way.

High level setup:
20 gallon Brewers Hardware jacketed conical fermenter - SOLD
20 gallon Stout HLT - SOLD
20 Gallon Stout MLT - SOLD
20 Gallon Stout BK - SOLD
4 Tap Keezer with SS perlicks - On Hold
4 way regulator - $150
5lb Aluminum CO2 tank -$40
2 Ball lock kegs - $130
Monster Mill MM2 with hopper and 1 hp motor.belt/pulleys - $350
Duda Diesel Plate Chiller - 120 Shipped
2 Stainless chugger pumps - SOLD
Stout oxygen system with tank and regulator - SOLD
BCS-462 - SOLD
Wifi adapter - SOLD
Control Panel - Need to break down, will list parts separately soon
GFCI circuit breaker - $30
DIY Glycol chiller (BCS controlled) - SOLD
DIY Stir plate - $30
5 Liter starter flask
2 Liter Starter flask
2 Still Dragon 2" Tri Clover adapters with 2 5500 watt heating elements and cable - $100
4 BCS Temp probes - SOLD
CIP system for corny and conical - SOLD
2 Vittles vault for grain storage - $20 each
2 Carboys - $15 each
Bench top capper - $30
hannah ph meter - $50
refractometer - $40


+ Everything needed to use all of this equipment (Tri clovers, butterfly valves, ball valves)

Overall system

Conical with psi gauge, ball lock adapter, butterfly valves, yeast harvester

HLT with two 2" ports (1 for element, 1 for included temp probe)

[imghttps://farm1.staticflickr.com/593/21841861740_48dbb058c4_z.jpg[/img]

MLT with bottom drain and false bottom

BK with whirlpool and two 2" ports

Monster Mill setup (Kennedy not included)

Control Panel

Hop Spider

Oxygen Setup

Chugger

Still dragon adapters with 5500 Watt elements

Keezer with stainless perlicks

$6500 takes every piece of brewing equipment out of my garage and into yours. It includes everything you need to brew. Even have a couple pounds of hops in the freezer. If you have a question about something I didn't list, just ask. I didn't list all of the tubing, tri clover connections, ball lock connectors etc., but its all here.

I put my heart and soul into researching and developing (I'm an R&D engineer by trade) this system, and I am sure the next owner will love it.

Hell, we can even brew the first batch together if you want me to walk you through it.

If I can't sell it all to one buyer, I will take offers on groups of items as long as it includes either the conical or the 3 stout pots.

 

[Matlockin86]

How much for the control panel?