CF Chiller

[TurboEtZ207]

Hello
I made a CF chiller or 10 mm 15 meeters of copper and 15 meeter of 19 mm rubber hose.
Everything is cool and working.
But i have a problem for pumping. My Brewzilla 65 pump cant do it.
Anybody have some ideas what pump to use ?

Does this to the job ?
https://www.aliexpress.com/item/100...6!sea!EE!800091158&curPageLogUid=VGz9bDZyNT9k

 

[Broken Crow]

I use one of those MP-15RM's in my rig for an approx. 33' CFC... It works fine, but; The smaller than 1/2" tubing does reduce the whirlpool/recirc (though it is still just adequate for 12 gallon batches in my keggle).
I'm not sure where you're located, but I got mine in Canada on ebay from this dealer:
https://www.ebay.ca/itm/33439868925...vf+sznhfalUJUFqplqEEKaW1VH|tkp:Bk9SR7DlqIOYYgfor about $90CAN. I can highly recommend it, as long as you keep your wort lines short..mine is mounted directly below my keggle and has a 3-way valve you can get here:
https://www.brewhardware.com/product_p/3wvalvel.htmfor switching between recirc and the fermenter.

 

[TurboEtZ207]

I use one of those MP-15RM's in my rig for an approx. 33' CFC... It works fine, but; The smaller than 1/2" tubing does reduce the whirlpool/recirc (though it is still just adequate for 12 gallon batches in my keggle).
I'm not sure where you're located, but I got mine in Canada on ebay from this dealer:
https://www.ebay.ca/itm/33439868925...vf+sznhfalUJUFqplqEEKaW1VH|tkp:Bk9SR7DlqIOYYgfor about $90CAN. I can highly recommend it, as long as you keep your wort lines short..mine is mounted directly below my keggle and has a 3-way valve you can get here:
https://www.brewhardware.com/product_p/3wvalvel.htmfor switching between recirc and the fermenter.
View attachment 822503

https://www.aliexpress.com/item/100...6!sea!EE!800091158&curPageLogUid=VGz9bDZyNT9k
This is same spec . I am from Estonia

 

[Cameronl]

If you're using it in the orientation pictured, the pump has to push the wort 15 meters uphill. What if you flipped it over and have the wort enter from the top and let gravity help?

 

[Broken Crow]

If you're using it in the orientation pictured, the pump has to push the wort 15 meters uphill. What if you flipped it over and have the wort enter from the top and let gravity help?

I don't know how this would translate to an AIO like a Brewzilla, but I mounted my pump so the inlet is just beneath the bottom of my keggle, and the top of the CFC is below the pump: I open the keggle valve and let gravity fill the CFC from the bottom up and once it's reached and primed the pump, I turn the pump on.

 

[TurboEtZ207]

is is same spec . I am from Est

If you're using it in the orientation pictured, the pump has to push the wort 15 meters uphill. What if you flipped it over and have the wort enter from the top and let gravity help?

I tried that to it did not have the power to to that
I will add a one more pump.