co2 regulator/s - Home Brew Forums
Register Now For Free!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > co2 regulator/s

Reply
 
Thread Tools
Old 08-17-2013, 03:57 AM   #1
phreakazoid
Recipes 
 
Aug 2013
Posts: 2


I'm setting up a soda dispenser (8 flavors). my question is that when I connect the co2 tank. do I have to use a primary and a secondary regulator? or can I just use a primary regulator and make sure my pressure is at the 60psi that's recommended by my unit?

any and all help is appreciated.
thank you

 
Reply With Quote
Old 08-26-2013, 02:13 AM   #2
Taz420NJ
Recipes 
 
Aug 2013
Posts: 55
Liked 8 Times on 7 Posts


You'd only need a secondary regulator if part of your system requires a lower pressure than the rest.. For example the system I am putting together (2x 10 button WunderBar guns) requires 100psi for the carbonator pump, but the BIB syrup pumps run on 20-60psi. So that's where a secondary regulator would be used. What's your system?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing the 10 psi regulator with a 30 psi regulator for Banjo Burner Icemaker Equipment/Sanitation 7 01-21-2014 04:55 AM
Re-purpose a Dual Gauge Regulator to be a Secondary Regulator inamays Bottling/Kegging 1 03-22-2013 10:16 PM
how to connect a commercial sanke regulator to a corney regulator? ????? HOPSareKEY Bottling/Kegging 4 02-08-2013 08:38 AM
WTB - Regulator Bonnet (Broken regulator part) ekjohns For Sale 1 05-26-2012 12:31 AM
Make a dual regulator into a single regulator set up fishnfever Bottling/Kegging 4 05-03-2011 11:23 PM


Forum Jump