First try with all grain, made a recipe. thoughts? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > First try with all grain, made a recipe. thoughts?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 02-01-2013, 03:01 PM   #1
supaphly42
Recipes 
 
May 2012
Syracuse, NY
Posts: 45



Been brewing extracts for a year, stepping up to all grain. Came up with a recipe based off some I've seen. Just want to see what y'all think of it.
12lbs UK 2 row pale
1lb caramel/crystal 64L (lhbs doesn't carry 60)
4oz roasted barley
Single infusion mash, 60 mins at 154. Batch sparge.
60 min boil with following hops.
1 oz fuggles @ 60
.5 oz east Kent goldings @ 30
.5 oz east Kent goldings @ 15
Pitch with safale us-05
Trying for something like an Irish red ale. Had the yeast on hand, but I think it'll work with this recipe. Thoughts?



 
Reply With Quote
Old 02-01-2013, 03:17 PM   #2
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,461
Liked 127 Times on 114 Posts


Looks easy enough. That will make you a beer for sure. The only thing I can really say is that at over 13lbs of grain you are going to have an above average ABV for an Irish Ale but that's probably not going to be much of an issue. The US-05 will work, but I like the Irish Ale Wyeast.

You got all the equipment setup for your first all-grain brew?


__________________
I hate Walder Frey...

 
Reply With Quote
Old 02-01-2013, 03:29 PM   #3
Arneba28
 
Arneba28's Avatar
Recipes 
 
Feb 2008
Amherst, Western New York
Posts: 2,192
Liked 17 Times on 12 Posts


looks good just not very "irish". Way too much grain I think. Cut that 13# back to like 9lbs
__________________
My Kegerator Project

 
Reply With Quote
Old 02-01-2013, 03:31 PM   #4
supaphly42
Recipes 
 
May 2012
Syracuse, NY
Posts: 45


Yeah, some other recipes had a lower grain bill, but I wanted something with a little more punch, haha. And almost there. Got all parts for cooler, just gotta build it up. We're getting about a foot of snow today, so probably brew next weekend. New brew kettle and propane burner, can't wait to try them out!

 
Reply With Quote
Old 02-01-2013, 06:39 PM   #5
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,461
Liked 127 Times on 114 Posts


Don't know if you just forgot to mention it or not but you didn't say anything about a wort chiller???
__________________
I hate Walder Frey...

 
Reply With Quote
Old 02-02-2013, 01:14 PM   #6
supaphly42
Recipes 
 
May 2012
Syracuse, NY
Posts: 45


Don't have one yet. It's next on my list, but the rest of the gear (just bought burner, kettles, and cooler parts in the past week) tapped me out. On a plus note, there's currently a foot of snow on the ground I can set the kettle in to cool, haha.

 
Reply With Quote
Old 02-02-2013, 02:43 PM   #7
jflongo
Recipes 
 
Jan 2013
Posts: 1,224
Liked 64 Times on 57 Posts


Quote:
Originally Posted by supaphly42 View Post
Don't have one yet. It's next on my list, but the rest of the gear (just bought burner, kettles, and cooler parts in the past week) tapped me out. On a plus note, there's currently a foot of snow on the ground I can set the kettle in to cool, haha.
I just made a wort chiller about 2 weeks ago. Found 3/8" ID / 1/2" OD 20' copper tubing for only about $13 at lowes. Got some 1/2" tubing, attached that to the out end with a hose clamp, and left about 4 feet for draining. On the other end attached the going in part with a hose clamp, and then the other end of that, I put a garden hose attachment. This all would have cost me under $20 if the garden hose attachment was cheaper :-) That cost me around $6-7 all by itself, and could only find a 3/4" one, so have to also by a coupler to step it down to the 1/2" size. So just that darn end was $8-9 with the adapter. Maybe you'll get luckier, I was stuck buying this at Ace where it's a little more pricey. But none the less, this was still under $25.

I just made a mash tun out of a 5g igloo cooler myself a few weeks ago, and did my first all grain with it last week. Have fun with your project, and enjoy your first all grain day with it

 
Reply With Quote
Old 02-02-2013, 02:56 PM   #8
tx-brewer
Recipes 
 
Nov 2012
Houston, Texas
Posts: 312
Liked 59 Times on 38 Posts


Quote:
Originally Posted by jflongo View Post

I just made a wort chiller about 2 weeks ago. Found 3/8" ID / 1/2" OD 20' copper tubing for only about $13 at lowes. Got some 1/2" tubing, attached that to the out end with a hose clamp, and left about 4 feet for draining. On the other end attached the going in part with a hose clamp, and then the other end of that, I put a garden hose attachment. This all would have cost me under $20 if the garden hose attachment was cheaper :-) That cost me around $6-7 all by itself, and could only find a 3/4" one, so have to also by a coupler to step it down to the 1/2" size. So just that darn end was $8-9 with the adapter. Maybe you'll get luckier, I was stuck buying this at Ace where it's a little more pricey. But none the less, this was still under $25.

I just made a mash tun out of a 5g igloo cooler myself a few weeks ago, and did my first all grain with it last week. Have fun with your project, and enjoy your first all grain day with it
was it on sale or something, all cooper tube I can find is nearly twice that. Am I looking in the wrong spot or something

 
Reply With Quote
Old 02-02-2013, 08:08 PM   #9
inhousebrew
Recipes 
 
Aug 2012
minneapolis, minnesota
Posts: 1,461
Liked 127 Times on 114 Posts


Quote:
Originally Posted by tx-brewer View Post
was it on sale or something, all cooper tube I can find is nearly twice that. Am I looking in the wrong spot or something
You guys are looking in the wrong places, there's tons of it for free in old building and construction sites....

More seriously though, you'll want something other than snow. Setting it in the snow will just melt all the snow along the side and then it will actually be insulating it to some degree. A water bath with a ton of snow in it is an option but that would still take a very long time with five gallons of 212* wort.
__________________
I hate Walder Frey...

 
Reply With Quote
Old 02-03-2013, 10:29 PM   #10
supaphly42
Recipes 
 
May 2012
Syracuse, NY
Posts: 45


Quote:
Originally Posted by jflongo View Post
I just made a wort chiller about 2 weeks ago. Found 3/8" ID / 1/2" OD 20' copper tubing for only about $13 at lowes. Got some 1/2" tubing, attached that to the out end with a hose clamp, and left about 4 feet for draining. On the other end attached the going in part with a hose clamp, and then the other end of that, I put a garden hose attachment. This all would have cost me under $20 if the garden hose attachment was cheaper :-) That cost me around $6-7 all by itself, and could only find a 3/4" one, so have to also by a coupler to step it down to the 1/2" size. So just that darn end was $8-9 with the adapter. Maybe you'll get luckier, I was stuck buying this at Ace where it's a little more pricey. But none the less, this was still under $25.

I just made a mash tun out of a 5g igloo cooler myself a few weeks ago, and did my first all grain with it last week. Have fun with your project, and enjoy your first all grain day with it
You lucked out on the copper, though right now their site is showing 3/8" x 20' for $20.71, so still not too bad. And yeah, I've still got a week, so maybe I will just pony up the cash and not deal with the headaches. Congrats on your first AG batch, and thanks for the advice!



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thoughts on my first All Grain Recipe galifrey Beginners Beer Brewing Forum 10 09-05-2011 03:46 AM
First All Grain Recipe, thoughts? persianninja Recipes/Ingredients 3 11-11-2010 07:02 AM
thoughts on my all grain ENG Brown recipe?? CaliBrewin All Grain & Partial Mash Brewing 3 07-13-2010 06:12 AM
1st all-grain IPA recipe... thoughts? riored4v Recipes/Ingredients 10 02-12-2009 02:53 PM
Thoughts on Recipe for First All Grain? Flipper Recipes/Ingredients 7 01-04-2008 03:57 AM


Forum Jump