Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Questions on stepping up a starter
Reply
 
Thread Tools
Old 12-18-2011, 04:59 PM   #1
nasmeyer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Michigan
Posts: 254
Liked 3 Times on 3 Posts

Default Questions on stepping up a starter

I have a couple of questions about stepping up a starter. I recently brewed an ale with a starting gravity of 1064 using a 1056 yeast. The Mr. Malty calculator showed I needed a starter of 3.1 liters based on the vitality of the smack pack. The ale finished a bit higher that was supposed to and took a couple days longer than I expected. I have read a few posts that lead me to believe maybe I should have stepped my starter up instead of making all 3.1 liters at one time, and thus creating a healthier yeast starter.

When making a 3.1 liter starter in a one gallon container with one yeast pack, is it better to make the entire 3 liter starter at one time? do it in 3 one liter steps? Or a one liter followed by a two liter step?

What is the maximum recommended size of a starter using one vial or smack pack I can make without stepping it up?

Since I use a one gallon container for my starter, do I need to chill my starter and decant for each added step, or can I just add the next step to my already active starter between 18 and 36 hours or so, and then decant the finished starter prior to pitching?

I also use nutrient and a quick shot of oxygen in each of my starters, and intermittently shake while fermenting, can I use nutrient and oxygen in each step if I am decanting the starter before pitching in to my 5 gallon batch?


nasmeyer is offline
 
Reply With Quote
Old 12-18-2011, 05:44 PM   #2
wiescins
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Chicago, IL
Posts: 231
Liked 4 Times on 4 Posts
Likes Given: 3

Default

subscribed, interested in this discussion as well.


wiescins is offline
 
Reply With Quote
Old 12-18-2011, 06:10 PM   #3
chickypad
lupulin shift victim
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
chickypad's Avatar
Recipes 
 
Join Date: Jul 2010
Location: SF Peninsula
Posts: 4,037
Liked 582 Times on 482 Posts
Likes Given: 242

Default

You can make a starter that big all in one step but I have a few thoughts. It sounds like you don't have a stir plate, did you agitate the starter at all? How long did you let it go, and did you add any yeast nutrient?

It could be that you didn't get as high cell count as you were expecting because of lack of enough O2 (thus the shaking question). I have heard Jamil discuss this as the rate limiting step for most starters. I was also thinking it might need a little more time to work on that bigger volume.
chickypad is offline
 
Reply With Quote
Old 12-18-2011, 06:11 PM   #4
chickypad
lupulin shift victim
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
chickypad's Avatar
Recipes 
 
Join Date: Jul 2010
Location: SF Peninsula
Posts: 4,037
Liked 582 Times on 482 Posts
Likes Given: 242

Default

oh my gosh, must still be asleep (or hungover). Somehow I didn't see that last paragraph. Okay, maybe I don't have anything to add!
chickypad is offline
 
Reply With Quote
Old 12-18-2011, 09:10 PM   #5
Buna_Bere
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Boston, MA
Posts: 258
Liked 22 Times on 19 Posts
Likes Given: 3

Default

Here's an interesting article on starters I found online.

Buna_Bere is offline
 
Reply With Quote
Old 12-18-2011, 10:35 PM   #6
msa8967
mickaweapon
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
msa8967's Avatar
Recipes 
 
Join Date: May 2009
Location: North Liberty, Iowa
Posts: 2,748
Liked 87 Times on 71 Posts
Likes Given: 88

Default

I have been told and read many times on this forum that it is best to try to double the starter size with each buildup and to not exceed going 4-5 times bigger in size in just one step. This may also depend on whether or not you use a stir plate. If you are just occasionaly shaking the starter container then I would recommend just doubling in size for each step. Others may have different opinions but this has worked well for me.
__________________
Mick Arnett
North Liberty, Iowa
"Beer will change the world. I don't know how, but it will."
msa8967 is offline
 
Reply With Quote
Old 12-18-2011, 11:29 PM   #7
BradleyBrew
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2010
Location: Parris Island, USA
Posts: 1,735
Liked 90 Times on 60 Posts
Likes Given: 16

Default

Begin making your starters 4 to 5 days out from your brew day. Make a small starter say 1000ml and let it ferment for 24 hours... then chill the starter and decant the spent "beer." Then add 2000ml of wort to the yeast cake.. and repeat. I did a stepped starter over this last week. I woke up on brew day, took the starter out of the fridge, decanted the beer, let it warm up to room temp and pitched 300ml of water with 30 grams of dme. It hit high krausen and I pitched it. I had visiable fermentation of the wort within 2 or 3 hours.
BradleyBrew is offline
 
Reply With Quote
Old 12-19-2011, 12:44 PM   #8
nasmeyer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Michigan
Posts: 254
Liked 3 Times on 3 Posts

Default

If the beer wasn't decanted before each additional step, wouldn't the beer/gravity be duluted to below the suggested starter gravity of 1040? For example, if my first 1 liter step finished at 1.010, and I added a second 1 liter step that was also 1.040, wouldnt my total volume now be around 1.025? Would this matter at all?
nasmeyer is offline
 
Reply With Quote
Old 12-19-2011, 01:52 PM   #9
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 2,336
Liked 178 Times on 143 Posts
Likes Given: 2

Default

I think the point of decanting is to get out the exhausted wort and replace it with fresh wort of the appropriate OG. If the fresh wort were added to the spent wort, the net OG would be lower. Lind of like adding more water.


william_shakes_beer is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starter Questions rodwha Beginners Beer Brewing Forum 16 12-01-2011 07:56 AM
Starter questions nasmeyer Beginners Beer Brewing Forum 2 12-28-2009 01:35 PM
Few starter questions Cerpintine Beginners Beer Brewing Forum 4 08-16-2009 06:47 PM
Stepping starter with small vessel android Beginners Beer Brewing Forum 7 04-20-2009 08:53 PM
Starter stepping up question nostalgia Beginners Beer Brewing Forum 19 06-22-2008 07:17 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS