How to step up a yeast starter - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > How to step up a yeast starter

Reply
 
Thread Tools
Old 11-29-2011, 02:35 AM   #1
billtzk
Recipes 
 
Apr 2007
Dallas
Posts: 1,624
Liked 23 Times on 21 Posts



I'm targeting 1.060 OG for my next brew, which will be an American stout. I will be using Wyeast 1450 Denny's Favorite 50. I have one Activator pack manufactured Sept 6, 2011. This will be a 10 gallon brew. I don't have a stirplate yet or an O2 system (will be buying both soon, but not in time for this brew) so I'll be using my typical "intermittant shaking" method for my starter.

I always make a starter, but I usually just make a single step 1500 ml starter about a day before pitching, so I'm pretty sure I'm always underpitching my 10 gallon batches. I want to correct that this time and pitch the right amount of yeast.

Mr. Malty calculator says for my yeast date, volume, OG, yeast production date, and method, I need to start with 2 activator packs and an 8.56 liter starter. That's with the "growth factor" slider all the way to the right.

I only have 1 pack of yeast and a 2000ml Erlenmeyer flask. That size flask is only good for a 1.5 liter starter, roughly. I have a gallon jug which I think would accommodate a 2.5 liter starter, maybe a bit moer. Or a 5 gallon carboy.

I don't have a brew day picked yet, so I'm flexible on the length of time required, but I can't go pick up another pack of yeast until the weekend, and I want to get started tomorrow. How can I go about stepping up this single Activator pack to the required 417 billion cells efficiently?
__________________
Reality is a crutch for people who can't cope with drugs. -Lily Tomlin

 
Reply With Quote
Old 11-29-2011, 02:47 AM   #2
michaeltrego
Recipes 
 
Sep 2009
Amherst, NH
Posts: 393
Liked 20 Times on 17 Posts


If you use your 1 gallon jug, it looks like you can get to your target pitching rate by starting with a 3L starter, and then stepping it up with another 3L starter.

 
Reply With Quote
Old 11-29-2011, 03:01 AM   #3
brewmonk
Recipes 
 
Apr 2009
Sharon,MA
Posts: 1,093
Liked 14 Times on 14 Posts


step up your yeast? make beer! just make a 5 gal batch of beer, then pitch it on the 10 gal. you'll have to wait a week for the first one, but you'll be drinkin that in no time.
__________________
-I'm not getting older, but the floor is getting further away.

 
Reply With Quote
Old 11-29-2011, 03:12 AM   #4
dezman
 
dezman's Avatar
Recipes 
 
Aug 2011
Marquette, Michigan
Posts: 151
Liked 1 Times on 1 Posts


Just make your normal starter with the 2000mL then when its done decant and pour yeast into the gallon jag filled with wort for next starter (2.5L in the jug should do fine). Try to shake both starters as much as you can to help growth.

 
Reply With Quote
Old 11-29-2011, 03:22 AM   #5
billtzk
Recipes 
 
Apr 2007
Dallas
Posts: 1,624
Liked 23 Times on 21 Posts


Quote:
Originally Posted by michaeltrego View Post
If you use your 1 gallon jug, it looks like you can get to your target pitching rate by starting with a 3L starter, and then stepping it up with another 3L starter.
That sounds right if I were starting with the 2 packs of yeast that Mr. Malty says I need. But I've only got one. Maybe starting with 3L and stepping up two times, 3L each, instead of once? I don't know how to calculate the yeast growth.

Quote:
Originally Posted by brewmonk View Post
step up your yeast? make beer! just make a 5 gal batch of beer, then pitch it on the 10 gal. you'll have to wait a week for the first one, but you'll be drinkin that in no time.
Yes, I think that would do the trick too. I could easily grow a sufficient sized starter for a 5 gallon batch in a reasonable time probably without stepping it up. Something simple like a SMASH using the same hops that I plan to use for my stout would get me plenty of yeast cake to pitch for my stout.

Plus I could harvest half the yeast from my conical as soon as primary fermentation is done, and transfer the beer and the rest of the cake to a carboy to finish up. Normally I don't secondary, but in this case it would free up my conical sooner for the stout.

Thanks for that suggestion. That's definitely a workable idea. And I'd have a 5 gallon SMASH to enjoy.
__________________
Reality is a crutch for people who can't cope with drugs. -Lily Tomlin

 
Reply With Quote
Old 11-29-2011, 03:26 AM   #6
billtzk
Recipes 
 
Apr 2007
Dallas
Posts: 1,624
Liked 23 Times on 21 Posts


Quote:
Originally Posted by dezman View Post
Just make your normal starter with the 2000mL then when its done decant and pour yeast into the gallon jag filled with wort for next starter (2.5L in the jug should do fine). Try to shake both starters as much as you can to help growth.
Yep, that was what I was figuring, but that amount of starter is predicated by Mr. Malty on starting with two packs of yeast, whereas I only have one.
__________________
Reality is a crutch for people who can't cope with drugs. -Lily Tomlin

 
Reply With Quote
Old 11-29-2011, 03:33 AM   #7
michaeltrego
Recipes 
 
Sep 2009
Amherst, NH
Posts: 393
Liked 20 Times on 17 Posts


Quote:
Originally Posted by billtzk View Post
That sounds right if I were starting with the 2 packs of yeast that Mr. Malty says I need. But I've only got one. Maybe starting with 3L and stepping up two times, 3L each, instead of once? I don't know how to calculate the yeast growth.
In Mr. Malty slide the growth factor all the way to the right. Set your OG, viability date and intermittent shaking. Then play with the volume until the number of vials is 1 and liters of starter is 2.99. This should show 4.28 gallons (which doesn't really matter at this point), and you will see that it results in 178 billion cells. This is your first step starter. Now uncheck the viability box and put 178 in the viability %. Change the volume to 10 gallons. You will see 2.8 liters are required to grow 178 billion up to to 417 billion cells. This is your second step starter. Voila.

2
People Like This 
Reply With Quote
Old 11-29-2011, 03:59 AM   #8
billtzk
Recipes 
 
Apr 2007
Dallas
Posts: 1,624
Liked 23 Times on 21 Posts


Now that is a clever way to use the calculator. But why does starting with 178 % viability equate to 178 billion cells?
__________________
Reality is a crutch for people who can't cope with drugs. -Lily Tomlin

 
Reply With Quote
Old 11-29-2011, 04:08 AM   #9
Sulli
 
Sulli's Avatar
Recipes 
 
Mar 2008
Salt Lake City, Utah
Posts: 395
Liked 35 Times on 18 Posts


Or you could use this. It correlates with Mr. Malty, and is much easier to use. Enter the info for your wort. Then set the date of your smackpack, then enter 3 liters with intermittent shaking for the first step, and 3 liters with intermittent shaking for the second step, and you are there.

billtzk Likes This 
Reply With Quote
Old 11-29-2011, 04:15 AM   #10
michaeltrego
Recipes 
 
Sep 2009
Amherst, NH
Posts: 393
Liked 20 Times on 17 Posts


Quote:
Originally Posted by billtzk View Post
Now that is a clever way to use the calculator. But why does starting with 178 % viability equate to 178 billion cells?
I learned that trick from Thirsty Boy. Mr. Malty assumes 100 billion cells of 100% viable yeast in one vial in a perfect world. So your viability will go down if your yeast has an older production date, or it can go up if you imagine your starter is mega "vial" of really fresh yeast.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeast starter step up question BigTerp Fermentation & Yeast 7 10-12-2011 12:13 AM
Lager yeast starter step-up MTHarrington Fermentation & Yeast 4 03-10-2011 03:29 PM
Yeast starter step-up? stratslinger Fermentation & Yeast 6 03-01-2011 06:29 PM
Step up starter or pitch more yeast? John000smith Fermentation & Yeast 2 11-19-2010 04:04 PM
Making a yeast starter - Step by Step Video johnnyc Fermentation & Yeast 2 02-05-2010 08:52 PM


Forum Jump