Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Anybody ever tried intentionally doing a 7+ gallon batch in a 6.5-gallon carboy?
Reply
 
Thread Tools
Old 06-23-2011, 03:11 PM   #1
jsweet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Rochester, NY
Posts: 810
Liked 26 Times on 25 Posts

Default Anybody ever tried intentionally doing a 7+ gallon batch in a 6.5-gallon carboy?

My first few batches, I didn't actually measure the top-off water, I just figured, "Well, my carboy holds X gallons, so if I fill it a few inches from the top, that must be X gallons." I later discovered, as many others have, that my carboys seem to hold something like X+0.5 to as much as X+1.5 gallons depending on the carboy. That explained why I was getting low OG readings on every batch. Since I have started actually measuring my top-off water, my OG is coming out within a couple of points of what I expected.

(I know some on this board don't believe it's possible to get an accurate gravity reading if you are topping off, but if that's true then I've been getting stunningly lucky in that when I accurately measure the volumes, I always get nearly right on what I was expecting)

So I just did a batch yesterday in my big carboy, and I'm looking at all that empty space at the top that I used to foolishly put top-off water in, and I'm thinking... why not just scale up the batch size?

I'll probably try this next time anyway, but I'm just wondering if anybody else has tried it and what their results were...


jsweet is offline
 
Reply With Quote
Old 06-23-2011, 03:44 PM   #2
Insomniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Oxford, UK
Posts: 684
Liked 6 Times on 6 Posts

Default

Seems reasonable, though might end up needing a blow off tube?


Insomniac is offline
 
Reply With Quote
Old 06-23-2011, 03:50 PM   #3
jsweet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Rochester, NY
Posts: 810
Liked 26 Times on 25 Posts

Default

These days, I put a blow-off tube on 100% of my beers for the first few days. I used to try and guess whether I would need one based on the gravity of the beer, the type of yeast I used, and how full the carboy was -- but I had a streak of three or four in a row where I was always exactly wrong, i.e. anytime I put a blowoff hose on it stayed dry, and anytime I put an airlock on right away it overflowed. So I just do it all the time now, and swap in an airlock after a few days.

But yeah, that's sorta what I'm thinking -- why not, right?
jsweet is offline
 
Reply With Quote
Old 06-23-2011, 03:54 PM   #4
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 46,281
Liked 3001 Times on 2908 Posts
Likes Given: 148

Default

If you fill it to the top, you're just gonna lose a bunch through the blow off
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom
IrregularPulse is offline
 
Reply With Quote
Old 06-23-2011, 03:57 PM   #5
jsweet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Rochester, NY
Posts: 810
Liked 26 Times on 25 Posts

Default

Quote:
Originally Posted by IrregularPulse View Post
If you fill it to the top, you're just gonna lose a bunch through the blow off
There's no way I'm going to lose 1.5 gallons through the blowoff, though, even if I filled it right to the brim (which I'm not suggesting).

The batches where I over-topped, they probably had 6.5 gallons in them at bottling time. I am guessing I could go a little higher even, probably get about 7 gallons, without losing more than a pint or two out the blowoff hose. Maybe I'm kidding myself...

I'm going to try this experiment either way, but I was curious if anybody'd already tried it. Well, besides me, since I already sort of tried this by accident when I over-topped.
jsweet is offline
 
Reply With Quote
Old 06-23-2011, 03:57 PM   #6
dallasdb
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2010
Location: Aurora, Colorado
Posts: 1,208
Liked 53 Times on 43 Posts
Likes Given: 17

Default

Quote:
Originally Posted by jsweet View Post
I'm looking at all that empty space at the top that I used to foolishly put top-off water in, and I'm thinking... why not just scale up the batch size?
One big problem, once fermentation is well under way even if you use a blow off tube you will blow off a ton of beer.

I've accidently topped my 5 gallon carboy to 5.5 gallons with a blowoff and after fermentation is done, I have .25 to .5 gallons in the container that held my blowoff tube.

It would honestly just be a waste.
dallasdb is offline
 
Reply With Quote
Old 06-23-2011, 04:08 PM   #7
jsweet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Rochester, NY
Posts: 810
Liked 26 Times on 25 Posts

Default

Quote:
Originally Posted by dallasdb View Post
I've accidently topped my 5 gallon carboy to 5.5 gallons with a blowoff and after fermentation is done, I have .25 to .5 gallons in the container that held my blowoff tube.
Really? Interesting, this is good to know. This has not comported with my experience of accidentally putting an extra half-gallon in, but this does make me wonder if I try to push it much further it could backfire just like some have suggested.
jsweet is offline
 
Reply With Quote
Old 06-23-2011, 04:29 PM   #8
dallasdb
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2010
Location: Aurora, Colorado
Posts: 1,208
Liked 53 Times on 43 Posts
Likes Given: 17

Default

From what it sounds like you have a 6 or 6.5 gallon carboy and mine is only 5 so you may have more headspace than mine does.

In fact on my last 5 gal batch I barely filled over the 5 gal mark and still have a significant (.25 gal) amount of liquid blowoff.
dallasdb is offline
 
Reply With Quote
Old 06-23-2011, 04:34 PM   #9
IXVolt
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IXVolt's Avatar
Recipes 
 
Join Date: Apr 2009
Location: Southern Oregon
Posts: 1,734
Liked 79 Times on 54 Posts
Likes Given: 77

Default

Make sure you control the temps to the low end of where the yeast are happy, it'll help reduce the blow-off.
IXVolt is offline
 
Reply With Quote
Old 06-23-2011, 04:36 PM   #10
dallasdb
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2010
Location: Aurora, Colorado
Posts: 1,208
Liked 53 Times on 43 Posts
Likes Given: 17

Default

Quote:
Originally Posted by IXVolt View Post
Make sure you control the temps to the low end of where the yeast are happy, it'll help reduce the blow-off.
I usually ferment 64-68 degrees depending on my basement temp.


dallasdb is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is a 3 gallon batch in a 6 gallon carboy bad? WortHog1242 Beginners Beer Brewing Forum 11 03-06-2010 05:04 PM
3 Gallon Carboy for 2.5 gal batch? Jeeperforlife Beginners Beer Brewing Forum 7 11-03-2009 08:43 PM
5 gall carboy for a 5 gallon batch? RedIrocZ-28 Beginners Beer Brewing Forum 12 01-10-2009 02:47 AM
5 gallon batch - ok to secondary in a 6 gallon carboy? Jakobrau Beginners Beer Brewing Forum 5 10-23-2008 01:23 AM
6.5 gallon carboy 5 gallon batch html034 Beginners Beer Brewing Forum 5 02-12-2008 02:53 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS