$10 thru the wall therms, pics too! - Page 4 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > $10 thru the wall therms, pics too!

Reply
 
Thread Tools
Old 01-14-2009, 05:34 PM   #31
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


Um... I dont know what it is called. It was an industrial shelving unit from Lowes... now upgraded with Diamond Plate shelves. It is 18' deep and 36" wide... each section is.

 
Reply With Quote
Old 01-24-2009, 04:38 PM   #32
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


New pic links, old ones are dead...






 
Reply With Quote
Old 01-24-2009, 05:17 PM   #33
planenut
HBT_SUPPORTER.png
 
planenut's Avatar
Recipes 
 
Aug 2008
Hanahan, SC (North Charleston)
Posts: 536
Liked 2 Times on 2 Posts


I did this on my two 10 Gallon coolers last week.

Works Great!

Thanks Pol

 
Reply With Quote
Old 01-24-2009, 05:18 PM   #34
BrewerBill
Recipes 
 
Nov 2008
The "Other" North Shore
Posts: 18

FWIW, I've had good luck with my digital therm w/ the wire lead, (as pictured). I toss the probe in my mash, brew, beef tenderloin, and haven't had any problems. Maybe I just got lucky.

POL, glad to see another Sky God. Love the IND L/O.
__________________
Thanks,

B.B.

 
Reply With Quote
Old 01-24-2009, 07:19 PM   #35
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


EVAN! was looking for the pics, he asked me to put some up as he is planning to do this with his cooler MLT as well. Between this in the MLT, the JC A419 in the HLT and the thermocouple and PID in the BK... I have pretty good temp. reporting across the system.

 
Reply With Quote
Old 01-24-2009, 07:20 PM   #36
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


Quote:
Originally Posted by BrewerBill View Post
FWIW, I've had good luck with my digital therm w/ the wire lead, (as pictured). I toss the probe in my mash, brew, beef tenderloin, and haven't had any problems. Maybe I just got lucky.

POL, glad to see another Sky God. Love the IND L/O.
Heh, I would not call myself a Sky God... I am pretty average, I am lucky I have not perished yet

 
Reply With Quote
Old 03-01-2009, 05:11 AM   #37
DarkSide
 
DarkSide's Avatar
Recipes 
 
Feb 2009
Barrie, Ontario
Posts: 71
Liked 1 Times on 1 Posts


Would this technique work with my keggle?

 
Reply With Quote
Old 03-01-2009, 12:49 PM   #38
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


Quote:
Originally Posted by Darko View Post
Would this technique work with my keggle?
If you are firing it with gas, Id worry about the heat from the burner causing problems with the plastic thermometer. But, the stopper idea should work just fine.

 
Reply With Quote
Old 03-02-2009, 02:39 AM   #39
conpewter
HBT_SUPPORTER.png
 
conpewter's Avatar
Recipes 
 
Nov 2007
East Dundee, Illinois
Posts: 5,109
Liked 53 Times on 48 Posts


I did this yesterday on my E-keggle. I switched the outlet to the bottom of the keg so I had a 7/8" hole left from where the old dip tube was. Since I don't have another keg in good condition sitting around... I figured it was a good time to put a thermometer in my keggle, to hide the hole..

So I got a #3 stopper and pushed it into the hole (almost goes all the way through but it is tight enough. I have a 1/4" probe thermometer that came off of one of the turkey fryer kits so I drilled a 1/8" hole and pushed the thermometer through (with a bit of keg lube). I think this also helped seal the stopper in the hole due to the outward pressure from the probe. Just lasted through my 2nd test on the rig today.
__________________
"People should not be afraid of their governments. Governments should be afraid of their people." - V

Primary: Nothin
Secondary: Shady Lord RIS, Water to Barleywine, Pumpkin wine, burnt mead
Kegged: Crappy infected mild
Bottles: Apfelwein, 999 Barleywine, Oatmeal Stout, Robust Porter, Robust smoked porter, Simcoe Smash

 
Reply With Quote
Old 03-02-2009, 03:51 AM   #40
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


So cheap, so easy... just like me.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
drilling through the wall? jpabian Kegerators & Keezers 10 09-05-2009 07:30 PM
My through the wall tap project... underwaterdan Kegerators & Keezers 23 01-18-2009 03:51 AM
found these in the wall springer Home Brewing Photo Forum 10 10-10-2008 08:40 PM
Wall-E WillPall General Chit Chat 39 07-02-2008 01:09 PM
Up against the wall! david_42 Equipment/Sanitation 4 06-11-2006 11:24 PM


Forum Jump