Spike Brewing Giveaway - New v3 Kettle

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Using water heater tank for boil kettle and MLT.
Reply
 
Thread Tools
Old 03-15-2011, 11:41 PM   #1
thirdeye13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: placerville, california
Posts: 13
Default Using water heater tank for boil kettle and MLT.

I have been doing multiple five gallon batches with much success with all grain batches but am looking to increase the size of my batches significantly. I am on a minimal budget and have come up with an idea to use water heater tanks for a boil kettle and mashing tun. I am a handyman and often replace water heaters as part of my job and am left disposing of them; usually there is nothing wrong with the tank itself.... I was thinking that using the actually water heater elements and tank to do the boiling and to use as the mash tun. It seems as if they would easily be converted to these. I was thinking of using multiple elements of lower wattage to do this so as not to burn the grain or overheat the wort in the boil kettle. It seems as if the ceramic/glass coating on the inside would hold up for a while if special attention is taken to ensure rusting and other corrosion within does not build up in case the steel beneath it is exposed. Does anybody have any thoughts on this or concerns whether this may or may not work? I would like to get this underway if at all possible as soon as possible.


thirdeye13 is offline
 
Reply With Quote
Old 03-18-2011, 01:08 AM   #2
Dynachrome
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Americas Hinterland, Wisconsin
Posts: 1,987
Liked 68 Times on 61 Posts
Likes Given: 535

Default

Plug "HERMS" into the seach bar.

I have a friend who does something very much like that with an electric turkey fryer.

glass lined, huh?
__________________
I drink therefore I am.
Dynachrome is offline
 
Reply With Quote
Old 03-18-2011, 05:44 AM   #3
thirdeye13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: placerville, california
Posts: 13
Default

most water heaters are lines with a ceramic coating to prevent rusting... apparently it is less expensive than stainless steel.
thirdeye13 is offline
 
Reply With Quote
Reply

Thread Tools



Forum Jump