I was able to spend a little more time on the cabinet today. It was about 34 degrees out so my plans of spending the day in the garage brewing and staining, sanding, and finishing the wood for this were put on hold. I did what I could inside with what I had ready. Here's some pictures of the progress:
Test fitting the top cabinet. Damn cats are everywhere!
Installed the lights
Better shot of the lighting
Stemware holders are in
Testing them out with the lighting behind them. I think this will look really nice once the mirror is in and all of our stemware is organized and up.
Installed the top cabinet. What a pain in the butt that damn thing proved to be. Luckily SWMBO woke up and helped screw it in while I held it in place. I have an oak strip that will cover the gap between the shelf and the bottom of the cabinet, I just need to cut it and glue it in place.
Stopping point for the day.
Hopefully I kick this damn chest cold and the weather warms up soon. It's colder than what the specs for the stain and sealer recommend so I'm likely not going to be posting any more progress on this for a week or two...