chrome_burner_420
New Member
- Joined
- Sep 11, 2007
- Messages
- 4
- Reaction score
- 0
I was wondering if there was a make it yourself hand pump for cleaning beer lines..
thanks for your answers in advance.
thanks for your answers in advance.
EdWort said:A real easy way to clean your beer line is to use MLF fittings on your beer lines. That way you can take them off to clean and soak. In the mean time, screw on a Grey gas in connector. Then you take a 2 liter pop bottle and fill it 2/3 with BLC and put on a carbonator cap. squeeze the rest of the air out, then charge it with 20 # of CO2. Connect the grey gas line (now connected to your beer line), turn the bottle upside down, pull the tap and the BLC will start to flow.
Beats tying up a corny to do the same thing, plus it makes your clean your black beer out ball lock connectors.
Bobby_M said:I always have a spare keg not being used. When I want to clean up my lines, I add BLC to the keg, pressurize and systematically put each of my faucet lines on the keg. and pump a bit in and let it sit in the lines for 2 hours. Then put some hot water in the keg and do it again to rinse.
Enter your email address to join: