Hey guys,
I have been doing a lot of reading and learned a lot on this website and i think I'm ready to begin my first all grain project.
Heres what Ill be doing:
Here I got this unit and it fixs 2 keggles very nicely with a outlet and it gives me room to expand it
http://www.bluemelon.com/photo/18762/749212.jpg
I also have a Bayou SQ14 burner and i will be getting another and i will then be attaching the burners to the bottom of the unit.
Also, I will be ordering a pump this weekend. http://www.austinhomebrew.com/product_info.php?products_id=12410
Now for the keggle conversion here is what i got to work with.
Cover- http://www.bluemelon.com/photo/18762/749207.jpg
Fittings- http://www.bluemelon.com/photo/18762/749208.jpg http://www.bluemelon.com/photo/18762/749209.jpg http://www.bluemelon.com/photo/18762/749211.jpg
I also have picce of copper i will be making into a filter for the bottom of the keggle. http://www.bluemelon.com/photo/18762/749210.jpg
I will be cutting little holes into a flex piece of cooper.
Also be getting a1/2 Inch x 50 Foot Coil Wort Chiller with Garden Hose Fittings- $79.99
http://nybrewsupply.com/products/wort-chiller-copper-immersion.php
What do you guys think about this?
Do you think those fittings or good or should i use stainless steal. I found those in the pluming section for not a bad price. I believe they are brass, what do you think?
Thank you all.
Cheers!
I have been doing a lot of reading and learned a lot on this website and i think I'm ready to begin my first all grain project.
Heres what Ill be doing:
Here I got this unit and it fixs 2 keggles very nicely with a outlet and it gives me room to expand it
http://www.bluemelon.com/photo/18762/749212.jpg
I also have a Bayou SQ14 burner and i will be getting another and i will then be attaching the burners to the bottom of the unit.
Also, I will be ordering a pump this weekend. http://www.austinhomebrew.com/product_info.php?products_id=12410
Now for the keggle conversion here is what i got to work with.
Cover- http://www.bluemelon.com/photo/18762/749207.jpg
Fittings- http://www.bluemelon.com/photo/18762/749208.jpg http://www.bluemelon.com/photo/18762/749209.jpg http://www.bluemelon.com/photo/18762/749211.jpg
I also have picce of copper i will be making into a filter for the bottom of the keggle. http://www.bluemelon.com/photo/18762/749210.jpg
I will be cutting little holes into a flex piece of cooper.
Also be getting a1/2 Inch x 50 Foot Coil Wort Chiller with Garden Hose Fittings- $79.99
http://nybrewsupply.com/products/wort-chiller-copper-immersion.php
What do you guys think about this?
Do you think those fittings or good or should i use stainless steal. I found those in the pluming section for not a bad price. I believe they are brass, what do you think?
Thank you all.
Cheers!