johnnyc
Well-Known Member
Anyone got suggestions on cleaning a burner? I had a bad boil over my last brew day and now not all of the holes on my burner will burn.
I tried soaking it in PBW then scrubbing it with a wire brush. After doing this I hosed it out and hit it with compressed air to hopefully get most of the water out. I then hung it up vertically to let any left drip out. No dice still spotty flames.
I am going to look for a wire "pipe cleaner" the right size I guess to see if that works. Think HD would have it? Any other suggestions? BTW its the burner that came w/ my turkey fryer.
Thx
Edit: Forgot to mention I tried using a small pin nail to roll around inside each hole before lighting and that didn't help much, if any.
I tried soaking it in PBW then scrubbing it with a wire brush. After doing this I hosed it out and hit it with compressed air to hopefully get most of the water out. I then hung it up vertically to let any left drip out. No dice still spotty flames.
I am going to look for a wire "pipe cleaner" the right size I guess to see if that works. Think HD would have it? Any other suggestions? BTW its the burner that came w/ my turkey fryer.
Thx
Edit: Forgot to mention I tried using a small pin nail to roll around inside each hole before lighting and that didn't help much, if any.