So I have 2 fridges, one which is a normal dorm room fridge which I broke while trying to convert it into a kegerator (I broke the evaporator line) and another which is a mini two compartment fridge/freezer which i cut out the mid section to allow cold air to move freely from the freezer to the fridge. I really want to keg more than 1 beer at a time and possibly start a lager sometime this summer. What I was hoping to do was to cut a rectangular hole in the freezer section of my two compartment fridge and run insulated ducting into my other fridge with two computer fans to control the flow of cold air.
Do yall think I would be hitting any evaporator lines or power lines by cuttting a 4''x8'' hole into my freezer section?
My 2 compartment fridge that can only fit 1 keg.
The inside of my fridge showing the hole that I cut out. I know the its an ugly hole but it works
I gutted the insides of my dorm fridge in hopes to use it for some other project...like this one
Do yall think I would be hitting any evaporator lines or power lines by cuttting a 4''x8'' hole into my freezer section?
My 2 compartment fridge that can only fit 1 keg.
The inside of my fridge showing the hole that I cut out. I know the its an ugly hole but it works
I gutted the insides of my dorm fridge in hopes to use it for some other project...like this one