This morning i was expecting to see some serious bubbling but it seems only an occasional bubble, like a few every minute.
How do i know if im stuck? Im afraid to take the lid off for hydrometer readings.
In homebrewing there is so much that we advise folks not to do, yet the one thing that EVERY book, podcast, magazine and website talks about is gravity readings....
How do you think we get them?
Do you think the advice to take them is a vast conspiracy by us old timers to ruin millions of new brewer's batches, so that they flee the hobby and give it a bad rap? Or so they make crappy beer and we kick your asses in contests?
With simple sanitization practices openning the fermenter to take a reading is perfectly safe. You won't spoil your beer.
I know it's a scary premise, but it is really silly to avoid something scientific like a gravity reading because you're afraid of that and instead rely on something faulty like counting bubbles. You have to man up, grow some stones and get over the idea that openning your fermenter to do something positive like take a gravity reading, is dangerous.
Our beer is much stronger than that.
Here, read this,
Revvy's advice for the new brewer in terms of worry. You might find the info and advice helpful....
Your HYDROMETER is the only BEST indicator of fermentation activity. Nothing else is accurate or consistent...
Unless you take a gravity reading you don't know what's really going on, not by airlock bubbling or by krausen formation. Neither of those signs are effective, they don't tell you exactly where on the fermentation process you are.
The amount of krausen can vary for whatever reason, it can come quick and depart quickly or it can linger long after fermentation is complete, and it all be normal.
And airlocks sometimes bubble or they don't.
If your airlock was bubbling and stopped---It doesn't mean fermentation has stopped.
If you airlock isn't bubbling, it doesn't mean your fermentation hasn't started....
If your airlock starts bubbling, it really doesn't matter.
If your airlock NEVER bubbles, it doesn't mean anything is wrong or right.
Your airlock is not a fermentation gauge, it is a VALVE to release excess co2. And the peak of fermentation has already wound down, so there's simply no need to vent off any excess co2.
Fermentation is not always "dynamic," just because you don't SEE anything happening, doesn't mean that any-thing's wrong,, and also doesn't mean that the yeast are still not working diligently away, doing what they've been doing for over 4,000 years.
That's why you need to take a gravity reading to know how your fermentation is going, NOT go by airlocks, or size of krausen, or a calendar, the horoscope or the phases of the moon (those things in my mind are equally accurate).
The most important tool you can use is a hydrometer. It's the only way you will truly know when your beer is ready...airlock bubbles and other things are faulty.
The only way to truly know what is going on in your fermenter is with
your hydrometer. Like I said here in my blog, which I encourage you to read,
Think evaluation before action you sure as HELL wouldn't want a doctor to start cutting on you unless he used the proper diagnostic instuments like x-rays first, right? You wouldn't want him to just take a look in your eyes briefly and say "I'm cutting into your chest first thing in the morning." You would want them to use the right
diagnostic tools before the slice and dice, right? You'd cry malpractice, I would hope, if they didn't say they were sending you for an MRI and other things before going in....
Thinking about "doing anything" like repitching, or bottling, or racking, without first taking a hydrometer reading is tantamount to the doctor deciding to cut you open without running any diagnostic tests....Taking one look at you and saying, "Yeah I'm going in." You would really want the doctor to use all means to properly diagnose what's going on?
Sorry but that really is the only answer that is accurate or consistant, the numbers on the little stick. I have had evrey airlock bubbling/non bubbling/slow bubbling/fast bubbling/little krausen/big krausen/slow forming krausen/krausen staying 3 weeks after the hydro showed terminal gravity scenario imaginable in nearly 1,000 gallons of beer, and none of that stuff is as accurate as 30 seconds with a hydrometer.
With simple sanitization practices openning the fermenter to take a reading is perfectly safe. You won't spoil your beer.
This is what I use, and it works with both buckets and carboys.
I replaced the plastic one a year ago with an extra long stainless baster from a kitchen ware store and it is awesome. But the plastic one from any grocery store works fine.
And
Here's what I do....
1) With a spray bottle filled with starsan I spray the lid of my bucket, or the mouth of the carboy, including the bung. Then I spray my turkey baster inside and out with sanitize (or dunking it in a container of sanitizer).
2) Open fermenter.
3) Draw Sample
4) fill sample jar (usualy 2-3 turky baster draws
5)Spray bung or lid with sanitizer again
6) Close lid or bung
6) add hydrometer and take reading
It is less than 30 seconds from the time the lid is removed until it is closed again. More like 15 if you ask me.
Probably less if you have help. And unless a bird flies in your place and lets go with some poop, you should be okay.