Ok, so what are peoples secrets on getting these d$mn things installed.
The smallest hose clamp I could find it 1/4" which works for the 3/16 hose on a 1/4" barb fitting, but my problem is getting it all through the brass nut that tightens everything on the back.
I hooked up the hose and clamp, fed it through the faucet hole on the tower down through the bottom, then I feed the brass ring up the opposite way but can't get it past the hose clamp.
I have a few on these things
but don't have the special tool and can't get a regular wrench to work.
So what am I missing? I could put the hose clamp on afterwords but would be hard to tighten as it is facing down, again tight space here.
The smallest hose clamp I could find it 1/4" which works for the 3/16 hose on a 1/4" barb fitting, but my problem is getting it all through the brass nut that tightens everything on the back.
I hooked up the hose and clamp, fed it through the faucet hole on the tower down through the bottom, then I feed the brass ring up the opposite way but can't get it past the hose clamp.
I have a few on these things
So what am I missing? I could put the hose clamp on afterwords but would be hard to tighten as it is facing down, again tight space here.