So I'm pretty new here, but the Forums have been a huge, huge help to me already. Anyways, I built my first Keezer this week. Well, today. I've now got my first kegged brew carbing inside of it.
Here's what I did:
I got a scratch/dent Frigidaire 14.8 Freezer (Energy Star Compliant!)
From Home Depot:
- 2x8 pressure treated pine boards
- liquid nails
- angle brackets
- R5 foam insulation board
- Silicone caulk
- 1" foam weatherstripping
From Austin Homebrew:
- 2x Perlick taps (Refrig. conversion kit)
- 4-way gas manifold
- A bunch of gas line
- A bunch of beer line
- A bunch of Oetiker clamps
- a few Ball-lock gas and liquid disconnects
Took me one evening to do. I started after work today, and finished around 2AM. :rockin:
And here are some photos (Also on flickr)
Checking space with some real-life kegs
Checking out the taps
All done!
Thanks to everyone on this board, especially those who have their own "My Keezer build" type thread.. I'm pretty sure I read it ;-)
Cheers!
Here's what I did:
I got a scratch/dent Frigidaire 14.8 Freezer (Energy Star Compliant!)
From Home Depot:
- 2x8 pressure treated pine boards
- liquid nails
- angle brackets
- R5 foam insulation board
- Silicone caulk
- 1" foam weatherstripping
From Austin Homebrew:
- 2x Perlick taps (Refrig. conversion kit)
- 4-way gas manifold
- A bunch of gas line
- A bunch of beer line
- A bunch of Oetiker clamps
- a few Ball-lock gas and liquid disconnects
Took me one evening to do. I started after work today, and finished around 2AM. :rockin:
And here are some photos (Also on flickr)
Checking space with some real-life kegs
Checking out the taps
All done!
Thanks to everyone on this board, especially those who have their own "My Keezer build" type thread.. I'm pretty sure I read it ;-)
Cheers!