scinerd3000
Well-Known Member
So ive been waiting for months to build a keezer so after hunting on craigslist i found a chest freezer for 30 bucks. I knwo how much i love looking at pictures of peoples projects so i figured i would return the favor. Heres what i did to it thus far.
I used 2 x 8 pine boards and cut them to shape. There bolted with 1/4 x 3.5 inch lag bolts with SS washers. I counter sank the holes so they wouldn't stick out.
After removing the lid to the freezer i taped off and painted with rustoleum automobile primer and then the notorius chalkboard paint.
Had to add a goat somewhere because of my brewery so i printed a picture of a B/W goat offline and cut it out with an exacto knife. Then i taped it and used blue rustoleum to spray over it.
finished lid:
I used 2 x 8 pine boards and cut them to shape. There bolted with 1/4 x 3.5 inch lag bolts with SS washers. I counter sank the holes so they wouldn't stick out.
After removing the lid to the freezer i taped off and painted with rustoleum automobile primer and then the notorius chalkboard paint.
Had to add a goat somewhere because of my brewery so i printed a picture of a B/W goat offline and cut it out with an exacto knife. Then i taped it and used blue rustoleum to spray over it.
finished lid: