I already had a 1/6 HP sump pump, the bin, and the bucket, then wandered around Lowe's for an hour to come up with this design. Quick, simple, and it works.
Parts list:
PVC female hose thread to female pipe thread adapter
24" PVC sprinkler riser
PVC full-circle shrub sprinker head
5 gallon bucket, with hole cut out in center of bottom
Rubbermaid tote bin (not sure the size, but large enough to fit upside-down bucket)
I left the tote bin out of the pics... Here's the sprinkler setup:
Add the bucket (I still need to notch the rim for the cord):
With the keg in place:
I used warm water with a bit of PBW, recirculated it for about 20 minutes, and the kegs, "fresh" from Pepsi service (that is, in dire need of a cleaning) come out squeaky-clean.
-John
Parts list:
PVC female hose thread to female pipe thread adapter
24" PVC sprinkler riser
PVC full-circle shrub sprinker head
5 gallon bucket, with hole cut out in center of bottom
Rubbermaid tote bin (not sure the size, but large enough to fit upside-down bucket)
I left the tote bin out of the pics... Here's the sprinkler setup:
Add the bucket (I still need to notch the rim for the cord):
With the keg in place:
I used warm water with a bit of PBW, recirculated it for about 20 minutes, and the kegs, "fresh" from Pepsi service (that is, in dire need of a cleaning) come out squeaky-clean.
-John