Primary Regulator PSI for Multiple Kegs

SSBrew - 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
N

NoVa

Active Member
Joined
Oct 5, 2008
Messages
26
Reaction score
1
I've been searching and I can't find a thread for answer to my question. I recently pieced together a 4 keg system with secondary regulators, but I'm not sure what PSI my primary regulator needs to be set at to adequately support all the kegs. Say 12+12+12+12= 48PSI for primary or do I need to do something differently?

Thanks
 
If your regulators are hooked up in-line on the high pressure port, you shouldn't have to worry about what your first regulator is set too.

My $0.02, if some one knows more about these systems feel free to chime in.
 
You shouldn't need more than 12 at the primary if your secondaries are at 12, but since you probably have check valves and such which can create resistance, I'd set the primary higher than the highest secondary setting you will use. 20 psi should be fine. 48 would be fine, too.
 

Similar threads

F
Need help with regulators/ co2 tank
Replies
9
Views
507
Bobby_M
Bobby_M
iandanielursino
Anyone ever thought of trying to use CO2 from the same batch to bottle that batch?
Replies
13
Views
555
iandanielursino
iandanielursino
Clint Yeastwood
Spunding Valves on Storage Kegs?
Replies
15
Views
560
odie
odie
Denis2121
Dual Outpur Gas Regulator
Replies
27
Views
942
Broken Crow
Broken Crow
Zenmeister
CO2 Regulator question
Replies
10
Views
258
Zenmeister
Zenmeister
Brewer's Friend 300

Latest posts

Back
Top