During my search of old postings I found this old thread and I'm hoping someone can help.
I received a Beer and Wine filtering kit from MoreBeer (item number FIL40 that looks exactly like the one in the video by the OP). The included instructions are sketchy, but it seemed simple enough. Two kegs, one with cloudy beer, one keg sanitized and empty. Connect both lines to the out posts on each keg, apply 3-5 pounds of pressure to the full keg, and the beer flows (slowly) through the one micron filter (in the correct direction) through the sanitized filtration system and should come out nice and bright on the other end.
Except the filtered beer looks exactly as murky and opaque as the un-filtered beer. My only thought is that somehow the filter is not seated properly in the clear plastic housing and the beer follows the path of least resistance AROUND the filter instead of through it.
Help!