- Joined
- Jun 2, 2011
- Messages
- 3,834
- Reaction score
- 364
Looking for a stainless drip tray for my kegerator and a way to attach it. It needs to be about 20" long, and attach without drilling holes. I'm thinking epoxy?
Help with drip tray
- Thread starter bluemoose
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
I simply glued a section of 1 x 3 to the freezer using Gorilla Glue and hanging the drip tray from that with some small screws.
An unexpected indirect benefit was that the wood piece moved the drip tray out a bit more so the taps are directly over the center of the tray from front to back.
OP
OP
- Joined
- Jun 2, 2011
- Messages
- 3,834
- Reaction score
- 364
Excellent idea. Thanks
runningweird
Well-Known Member
The only tray on that site would be fine under a tower, but it isn't going to work well as a front mount..
Cheers!
BoogieBrandBooze
Well-Known Member
I epoxied some metal shelf brackets (these I think: http://www.lowes.com/pd_16981-1469-...entURL=/pl__0__s?Ntt=shelf+bracket&facetInfo=) to the front and used velcro on the top of the brackets and bottom of the drip tray to secure it. The velcro allows for easy removal for cleaning and holds it on fantastically. I bought my drip tray from Beverage Factory (http://www.beveragefactory.com/draftbeer/drip-trays.shtml) mainly because they had the size I required (36") and the price was right.
terrapinj
Well-Known Member
i plan on attaching mine via rare earth magnets
Similar threads
