- Joined
- Nov 6, 2007
- Messages
- 62,016
- Reaction score
- 6,922
I'm working on an electric brew rig. I have electronics knowledge, but really suck at planning things out. Plus I have a new born coming and really, with all the projects I have going and planned, I'd love to just tell someone what I want, what I have and pay them to draw up a parts list with schematic. It's a simple system. I will do all the assembly and wiring. I just need to know what all components to buy for the control box.
Supply will be a single 50A breaker. Non GFCI at the box.
1 pump
2 5500W elements (or a 5500W for BK and a 4500W for EHLT)
A stir motor for the HLT.
That's really it. If interested let me know. I already own a control box, 1x PID and SSr with heat sink and thermocouple.
Want to be able to run both elements at the same time, Turn pump on and off and turn stir motor on/off. Also cut power to complete system. I want to feed the box with a single cord then branch out to the elements, pump and motor.
If anyone is interested in this that has done one before and has pics/writeup for testimonial, let me know what you think you'd charge.
Supply will be a single 50A breaker. Non GFCI at the box.
1 pump
2 5500W elements (or a 5500W for BK and a 4500W for EHLT)
A stir motor for the HLT.
That's really it. If interested let me know. I already own a control box, 1x PID and SSr with heat sink and thermocouple.
Want to be able to run both elements at the same time, Turn pump on and off and turn stir motor on/off. Also cut power to complete system. I want to feed the box with a single cord then branch out to the elements, pump and motor.
If anyone is interested in this that has done one before and has pics/writeup for testimonial, let me know what you think you'd charge.