cbraun77s
Well-Known Member
I have a complete 20+ gallon three vessel system for sale. It has served me fantastically for over 4 years, but I must say goodbye as I move onto bigger and better things (5-7BBL).
So, here is the details. Don't message me on HBT, send e-mail to the address listed below. I will only do local pickup. (Lancaster and Chester County)
20+ Gal. Brew Kettle with Tangential Inlet, Thermowell & Sight Glass
Combi Brew Kettle/Whirlpool
Tangential Inlet
Sight Glass with Tri Clamp Fittings
Thermowell with Thermometer
(2) Sanitary 3/4" ball valves (5/8" ID)
(2) Sanitary Hose Barbs – 1/2"
Tri Clamps and gaskets
Actual total capacity approx. 21.5 gal.
conical-fermenter.com/products/brew-kettles/
NEW PRICE- $565
19.8 Gal. Mash Tun
Mash Tun
False Bottom
Sanitary 3/4" ball valve (5/8" ID)
(3) Tri Clamps, with gaskets
(2) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
Welded-In Recirculation Fittings
http://conical-fermenter.com/products/mash-tuns/
NEW PRICE-$469
19.8 Gal.Hot Liquor Tank with HERMS Coil & Sight Glass
Simply the most advanced hot liquor tank available.
Hot Liquor Tank
Sanitary 3/4" ball valve (5/8" ID)
(6) Tri Clamps, with gaskets
(3) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
(2) HERMS Fittings
Stainless Internal Coil
Sight Glass
http://conical-fermenter.com/products/hot-liquor-tanks/
NEW PRICE- $629
Fully automated electric control panel. Used the directions and materials from here:
http://www.theelectricbrewery.com/control-panel
NEW PRICE- $2154
March High Temp.Brewing Pump-Model 809
http://morebeer.com/products/march-high-temperature-brewing-pump-flow.html
NEW PRICE- $159
Super Chiller- Immersion Wort Chiller (50Ft x 1/2 in)
http://morebeer.com/products/wort-c...atches-50ft-of-12-in-with-brass-fittings.html
NEW PRICE- $117.95
Stainless Steel Quick Disconnects (2 male & 2 female) attached to wort chiller
http://morebeer.com/products/mpt-stainless-steel-female-quick-disconnect.html
http://morebeer.com/products/mpt-stainless-steel-male-quick-disconnect.html
NEW PRICE-$49.80
10-gallon "tippy dump" brew sculture- similar to the more beer sculpture listed below. Mine is powder coated black.
http://morebeer.com/products/10-gallon-tippydump-brewsculpture-1.html
NEW PRICE- $1,200 (built for me)
Grain Mill with 7 pound hopper.
http://www.homebrewing.org/Barley-Crusher-Grain-Mill_p_872.html?AffId=95
NEW PRICE- $130
I will also throw in the following to someone looking for everything they need:
(2) 5 gallon glass carboys
(2) 6 gallon glass carboys
New PRICE- cheap prices $25-35
(4) Used Ball Lock Cornelius Kegs
http://www.homebrewing.org/5-Gallon-Cornelius-Keg-Ball-Lock_p_70.html
NEW PRICE- $49.99 x 4= $199.96
TOTAL NEW PRICE- $5,773.71
All the work is done for you here. I will even throw in a custom build vent hood. I will post pictures as well.
I have this priced to move: $4,300 ****note change
E-mail with interest or questions:
[email protected]
So, here is the details. Don't message me on HBT, send e-mail to the address listed below. I will only do local pickup. (Lancaster and Chester County)
20+ Gal. Brew Kettle with Tangential Inlet, Thermowell & Sight Glass
Combi Brew Kettle/Whirlpool
Tangential Inlet
Sight Glass with Tri Clamp Fittings
Thermowell with Thermometer
(2) Sanitary 3/4" ball valves (5/8" ID)
(2) Sanitary Hose Barbs – 1/2"
Tri Clamps and gaskets
Actual total capacity approx. 21.5 gal.
conical-fermenter.com/products/brew-kettles/
NEW PRICE- $565
19.8 Gal. Mash Tun
Mash Tun
False Bottom
Sanitary 3/4" ball valve (5/8" ID)
(3) Tri Clamps, with gaskets
(2) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
Welded-In Recirculation Fittings
http://conical-fermenter.com/products/mash-tuns/
NEW PRICE-$469
19.8 Gal.Hot Liquor Tank with HERMS Coil & Sight Glass
Simply the most advanced hot liquor tank available.
Hot Liquor Tank
Sanitary 3/4" ball valve (5/8" ID)
(6) Tri Clamps, with gaskets
(3) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
(2) HERMS Fittings
Stainless Internal Coil
Sight Glass
http://conical-fermenter.com/products/hot-liquor-tanks/
NEW PRICE- $629
Fully automated electric control panel. Used the directions and materials from here:
http://www.theelectricbrewery.com/control-panel
NEW PRICE- $2154
March High Temp.Brewing Pump-Model 809
http://morebeer.com/products/march-high-temperature-brewing-pump-flow.html
NEW PRICE- $159
Super Chiller- Immersion Wort Chiller (50Ft x 1/2 in)
http://morebeer.com/products/wort-c...atches-50ft-of-12-in-with-brass-fittings.html
NEW PRICE- $117.95
Stainless Steel Quick Disconnects (2 male & 2 female) attached to wort chiller
http://morebeer.com/products/mpt-stainless-steel-female-quick-disconnect.html
http://morebeer.com/products/mpt-stainless-steel-male-quick-disconnect.html
NEW PRICE-$49.80
10-gallon "tippy dump" brew sculture- similar to the more beer sculpture listed below. Mine is powder coated black.
http://morebeer.com/products/10-gallon-tippydump-brewsculpture-1.html
NEW PRICE- $1,200 (built for me)
Grain Mill with 7 pound hopper.
http://www.homebrewing.org/Barley-Crusher-Grain-Mill_p_872.html?AffId=95
NEW PRICE- $130
I will also throw in the following to someone looking for everything they need:
(2) 5 gallon glass carboys
(2) 6 gallon glass carboys
New PRICE- cheap prices $25-35
(4) Used Ball Lock Cornelius Kegs
http://www.homebrewing.org/5-Gallon-Cornelius-Keg-Ball-Lock_p_70.html
NEW PRICE- $49.99 x 4= $199.96
TOTAL NEW PRICE- $5,773.71
All the work is done for you here. I will even throw in a custom build vent hood. I will post pictures as well.
I have this priced to move: $4,300 ****note change
E-mail with interest or questions:
[email protected]